Replaces

1999-1999 Pontiac Grand Am Upper Intake Manifold for V6 3.4L (8th Vin Digit E)

Part Details

  • Location: Upper

This part replaces:

  • HOLLANDER 329-01499
  • OE # 24508396
  • DORMAN 615-198

  • New

Our intake manifolds are some of the highest quality replacements on the market!

This metal UPPER intake manifold is a new, aftermarket replacement part. It is a direct bolt on that is built to strict quality control standards.

Specifications:

  • One Piece Design Upper Intake Manifold
  • Re-engineered metal
  • Replaces dealer part number: 24508396

The original intake manifold, due to the design, has an abnormal tendency to warp, leading to overheating and in many cases complete engine failure and/or damage to other parts of the car's engine. This new and improved intake manifold is designed to eliminate those problems!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Spark Plug Wires (0:41 in the video)
    • Unplug each of the spark plug wires - remember their order
    • Remove the spark plug wires from their clip
    • Remove the two vacuum hoses
    • Remove the 10mm bolts from the throttle body bracket
  2. Removing the Air Intake (1:44 in the video)
    • Loosen the air intake hose clamps with a flat blade screwdriver
    • Remove the air intake hose from the intake manifold
    • Disconnect the vacuum hose on the air intake hose
    • Disconnect the EGR harness
    • Remove the air intake hose from the air box
  3. Disconnecting the Intake Manifold (2:22 in the video)
    • Remove the two 13mm bolts from the throttle body
    • Remove the 10mm bolts from the top of the coil pack
    • Remove the 13mm bolts from the bottom of the coil pack
    • Slide back the hose clamp with a pair of pliers on the back of the intake manifold
    • Disconnect the hose
    • Remove the two 7mm bolts from the back of the MAP sensor
    • Disconnect the MAP sensor harness
    • Remove the sensor
    • Remove the hose with a flat blade screwdriver
    • Remove the two 10mm bolts from the EGR Valve
  4. Loosening the Upper Intake Plenum (4:40 in the video)
    • Remove the 10mm bolts from the upper intake plenum
    • Remove the 13mm nut from the upper intake plenum
    • Remove the 10mm bolt below the right side of the intake manifold
  5. Disconnecting the Coolant Hoses (5:29 in the video)
    • Remove the cap on the radiator overflow bottle
    • Slide a drip pan underneath the drain plug
    • Remove the drain plug and drain the coolant
    • Pry off the coolant hoses
    • Remove the hoses from the top of the manifold
    • Replace and tighten the drain plug
  6. Removing the Upper Intake Manifold Plenum (6:43 in the video)
    • Lift the upper intake plenum up and aside
    • Remove the 13mm nut from the throttle body
    • Remove the throttle body
    • Remove the upper intake plenum
  7. Installing the Upper Intake Manifold Plenum (7:36 in the video)
    • Insert the 13mm nut to the throttle body and intake plenum
    • Insert the upper intake manifold plenum into place
    • Insert the 10mm bolts from the upper intake plenum
    • Insert the 13mm nut from the upper intake plenum
    • Torque the 10mm bolts to 18 foot-pounds
  8. Installing the MAP Sensor and Throttle Body (8:53 in the video)
    • Insert the two 7mm bolts from the back of the MAP sensor bracket
    • Connect the MAP sensor to the lead
    • Connect the sensor to the intake manifold
    • Tighten the 7mm bolts to the MAP sensor
    • Insert the 10mm bolts from the top of the coil pack
    • Insert the 13mm bolts from the bottom of the coil pack
    • Insert the hose and hose clamp on the back of the intake manifold
    • Insert the vacuum hoses to the intake manifold
    • Remove the rubber plug on the old manifold plenum to the new one
    • Tighten the two 13mm bolts to the throttle body
    • Tighten the 10mm bolts to the throttle body bracket
  9. Installing the EGR Valve (10:55 in the video)
    • Slide the hoses onto the coolant line
    • Tighten the hoses with the clamp and pliers
    • Place the gasket below the EGR
    • Insert the EGR and tighten the 10mm bolts
  10. Installing the Air Intake (12:06 in the video)
    • Loosen the air box with a Phillips screwdriver
    • Push the air intake hose into the throttle body
    • Tighten the Phillips screws on the air box
    • Tighten the air intake hose clamps with a flat blade screwdriver
    • Connect the vacuum hose on the air intake hose
    • Connect the EGR wiring harness
  11. Installing the Spark Plug Wires (13:39 in the video)
    • Clip in the spark plug wires clip
    • Plug each of the spark plug wires by number
  12. Refilling the Coolant (14:04 in the video)
    • Insert a funnel into the coolant bottle
    • Refill the coolant as needed

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket

  • Specialty Tools

  • Drain Pan
  • Funnel

How-to Video:

(14:31 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket

  • Specialty Tools

  • Drain Pan
  • Funnel



This part replaces:

  • HOLLANDER 329-01499
  • OE # 24508396
  • DORMAN 615-198

Vehicle Fit

  • 1996 Chevy Lumina APV Upper Intake Manifold
  • 1997-1999 Chevy Venture Upper Intake Manifold
  • 1999 Olds Alero Upper Intake Manifold for V6 3.4L (8th Vin Digit E)
  • 1996-1999 Olds Silhouette Upper Intake Manifold
  • 1999 Pontiac Grand Am Upper Intake Manifold for V6 3.4L (8th Vin Digit E)
  • 1999 Pontiac Montana Upper Intake Manifold
  • 1996-1998 Pontiac Trans Sport Upper Intake Manifold
  • 1999 Pontiac Trans Sport Upper Intake Manifold
$214.95
Only 2 left in stock
Part #: 1AEIM00039

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est