1994-1997 Honda Accord ABS Sensor & Harness Front Passenger Side L4 for L4 2.2L Front Passenger Side

Part Details

  • Location: Front
  • Location: Passenger Side

This part replaces:


  • New

This replacement Front Anti-Lock Brake Sensor & harness is just what you need to get your vehicle's ABS system in good operating condition again!

A bad or malfunctioning ABS sensor or harness can cause an ABS light to illuminate on your instrument panel, and store an ABS diagnostic error code. If your ABS wiring harness is corroded or damaged it will prevent your ABS sensor, and ABS system from working properly.


  • Fits RH (Passenger Side) FRONT
  • Includes ABS Sensor & Harness
  • Replaces dealer part numbers: 57450SV4950, 57450-SV4-950
  • Correct connectors and clips for easy replacement
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

These are electrical parts and are all tested before they leave our warehouse.

This electrical item is not returnable, it is only eligible for exchange.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheels
    • Remove the center cap and loosen the lug nuts.
    • Raise and secure the car.
    • Remove the lug nuts and pull the wheel off.
  2. Remove the ABS sensor
    • Remove the four 10 mm bracket bolts and the two 12 mm bolts securing the ABS sensor.
    • Unplug the ABS harness from the engine bay.
    • Tie a bit of string to the end of the harness.
    • Pull out the ABS sensor.
  3. Install the new ABS sensor
    • Use the string to thread the ABS harness through and to the engine bay.
    • Plug the ABS harness in.
    • Mount the ABS harness by bolting in the four 10 mm bolts and two 12 mm bolts.
  4. Put the wheel back on.
    • Tighten but do not torque the lugs using a star pattern.
    • Lower the car and torque the lug nuts to 75-85 ft lbs.
    • Put the center cap on.

How-to Video:

(06:27 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 12mm Socket
  • 18mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands

This part replaces:


Vehicle Fit

  • 1997-1999 Acura CL ABS Sensor & Harness Front Passenger Side L4 Front Passenger Side
  • 1994-1997 Honda Accord ABS Sensor & Harness Front Passenger Side L4 for L4 2.2L Front Passenger Side
  • 1995-1998 Honda Odyssey ABS Sensor & Harness Front Passenger Side Front Passenger Side
Part #: 1ABES00042

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est