Monroe Quick-Struts® 271662L & 271662R
This is a new MONROE REAR strut and spring assembly SET of 2. We recommend when replacing struts, performing an alignment after
Quantity: (2) Quick Struts
Side: Both LH (Driver Side) & RH (Passenger Side)
Vehicle Type: All (excluding Police & Taxi Cab Models or Models with 18 Inch Wheels)
Engine Size: ALL
Warranty: Limited Lifetime Warranty*
Does not fit the following packages or models:
Models with Electronic, AIR, or Modulated Suspensions
Police or Taxi Cab Models
Models with 18 inch wheels
Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the
first time. Enhances the handling, safety and performance of your vehicle.
Includes the following preassembled components:
- Bearing Plate
- Upper Spring Isolator
- Upper Spring Seat
- Coil Spring
- Boot Kit
- Lower Spring Isolator
- Premium Strut
The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required
for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil
spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each
Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.
In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic.
This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the
whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact
tools when reassembling.
Warranty Note: Tenneco Inc. warrants qualifying Monroe® products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed.
Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes.