Replaces

1998-2000 Chrysler Cirrus Rear ABS Sensor with Harness (Mopar)

Part Details

  • Brands: Mopar
  • Front / Rear Location: Rear

This part replaces:

  • Mopar 4764107AB
  • OE # 4764107AB
  • OE # 4764107ABC

  • New

MOPAR ABS SENSOR WITH HARNESS: 4764107AB

This ABS sensor with harness is a genuine Mopar replacement part! It is the very same piece you would receive if purchased from your local dealer!

Specifications:

  • Brand New Mopar ABS Sensor with Harness
  • Fits either LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part number: 4764107AB
  • 100% factory tested
  • Direct replacement
  • Built to strict quality control standards

 

These are electrical parts and are all tested before they leave our warehouse. This electrical item is not returnable, it is only eligible for exchange.

Now you can have a genuine Mopar ABS sensor with harness shipped right to your door!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (0:50)
    • Disconnect the negative battery cable.
    • Pry off the reflector.
    • Pry up the switch panel.
    • Disconnect all of the harnesses on the switch panel.
    • Pull the triangular trim panel off.
    • Remove the two uncovered 7mm bolts.
    • Lift the door panel up and off.
    • Turn the courtesy light counterclockwise to remove.
  2. Removing the Side Mirror (2:29)
    • Pull down the water shield.
    • Disconnect the mirror harness.
    • Remove the four 11mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. Replacing the Side Mirror (3:53)
    • Peel the backing off of the new pad and stick it down into place.
    • Feed the harness down into the door.
    • Line up your side mirror and push it into place.
    • Reconnect the mirror harness.
    • Replace the water shield.
  4. Replacing the Door Panel (6:42)
    • Hook the bottom clips on the door panel into place.
    • Twist the courtesy light clockwise into place.
    • Push the panel into place.
    • Replace the two 7mm bolts.
    • Replace the triangular trim panel.
    • Reconnect the switch panel and push it down into place (back first).
    • Reconnect the negative battery cable.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 8mm Wrench

How-to Video:

(08:51 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • Mopar 4764107AB
  • OE # 4764107AB
  • OE # 4764107ABC

Vehicle Fit

  • 1998-2000 Chrysler Cirrus Rear ABS Sensor with Harness (Mopar)
  • 1998-2000 Dodge Stratus Rear ABS Sensor with Harness (Mopar)
  • 1998-2000 Plymouth Breeze Rear ABS Sensor with Harness (Mopar)
$74.95
Save 0%
List: $75.00 Save: $0.05
Only 1 left in stock
Part #: MPTRS00004

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Brand #: 4764107AB

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est