1ASTS02207-2005-09 Subaru Outback Front Driver Side Strut & Spring Assembly

Replaces

2005-09 Subaru Outback Front Driver Side Strut & Spring Assembly TRQ SCA57984

1ASTS02207
FREE SAME DAY SHIPPING
Save 26%
List: $151.95 Save: $39.00
Part 1ASTS02207
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57984

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount.  Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.

Strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut

Install Tip: To keep your vehicle operating safely and as designed:

  • Replace your shocks & struts in pairs. This will avoid mixing parts (old and new or brands). Mixing parts can cause variations in movement between the vehicle’s body and wheel, resulting in handling irregularities.
  • Have an alignment performed after replacing your shocks and struts this will ensure proper tracking and protect your vehicle’s tires from premature wear.

 

Easy install - Pre-assembled, loaded struts
No specialty tools required

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    A professional alignment is recommended after this repair has been completed

  1. step : Removing the Wheel (0:26)
    • Find level ground
    • Loosen the lug nuts with the vehicle on the ground with a 19mm socket and breaker bar
    • Raise the vehicle with a floor jack from the jacking point behind the oil pan (do not jack up from directly underneath the oil pan)
    • Secure the vehicle on jack stands by placing the jack underneath the pinch weld and locking the jack
    • Remove the lug nuts
    • Pull off the wheel
    • Place the wheel underneath the side frame rail
  2. step : Removing the Strut (3:21)
    • Open the hood
    • Press the tabs and remove 12mm bolt and the ABS wire bracket from the strut
    • Remove the bolt on the brake line bracket with a 12mm wrench
    • Loosen the strut nuts with a 19mm socket and a breaker bar
    • Remove one bolt
    • Remove the three nuts from the top of the strut with a 12mm socket
    • Remove the bolt from the bottom of the strut
    • Lower the strut down and out
  3. step : Installing the Strut (10:19)
    • Transfer the bolts from the old strut to the new strut
    • Insert the strut up into place
    • Line up the bolt holes with the knuckle
    • Thread a nut on top by hand
    • Insert two lower strut bolts by hand
    • Tighten the three nuts evenly to the top of the strut with a 13mm deep socket and ratchet
    • Tighten the lower bolts with a 17mm socket and ratchet
    • Torque the bolts to 112 foot-pounds
    • Insert the brake line in place and tighten the 12mm bolt
    • Tighten the 12mm bolt to the ABS wire
  4. step : Reattaching the Wheel (16:04)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Raise the jack
    • Remove the jack stands
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 89 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Wrenches - Metric

  • 19mm Wrench


Fits the following Makes:

Year Make Model Description
2005-2009Subaru Outback Subaru Outback Front Driver Side Strut & Spring Assembly

Part Interchange

Brand Label Part Number
KYB SR4492
KYB Shocks & Struts SR4492
Monroe 272566
Monroe Shocks & Struts 272566
Unity Automotive 11905

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA57984
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2005-09 Subaru Outback Front Driver Side Strut & Spring Assembly TRQ SCA57984-1ASTS02207 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.