This replacement mirror is just what you need to get your vehicle in good working condition again!

Mirror specifications:

  • RH (Passenger Side)
  • Manual Remote
  • Folding
  • Heated
  • BLUE TINTED GLASS
  • Replaces dealer part number: 1J1857508J01C, 1J1 857 508 J01 C
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has good cost savings over a dealer mirror.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Part Details

  • Mirror Glass Type: Tinted Glass
  • Mirror Heating Type: Heated
  • Mirror Operation: Manual Remote

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Side Mirror (0:37)
    • Pry off the panel inside the door pull with a flat blade screwdriver
    • Pull the window switch panel up and out
    • Disconnect the window switch wiring harness
    • Remove the three Phillips screws behind the door pull
    • Remove the three T20 Torx bolts from the bottom of the door panel
    • Remove the Phillips screw from the top front corner of the door panel
    • Pry the door panel off by hand
    • Lift the door panel up and off the window sill
    • Disconnect the mirror wiring harness
    • Pull the mirror wiring harness free of the foam
    • Remove the T20 Torx bolt from the speaker panel
    • Pry off the speaker and pull back the speaker insulation
    • Remove the T45 Torx bolt from the mirror base
    • Pull off the mirror.
  2. step : Installing the New Side Mirror (2:42)
    • Feed the mirror wiring harness through the door
    • Push the mirror into place
    • While holding the mirror, insert the T45 Torx bolt into the mirror base
    • Connect the mirror wiring harness
    • Push the speaker panel into place, bottom first
    • Insert the T20 Torx bolt into the speaker panel
    • Put the door panel into place
    • Push in the door panel clips
    • Insert the three Phillips screws behind the door pull
    • Insert the three T20 Torx Bolts into the bottom of the door panel
    • Insert the Phillips head screw into the top front corner of the door panel
    • Reconnect the window switch wiring harness
    • Push the switch panel into place
    • Push the door pull panel into place

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver
  • T45 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2009 VW GTI Manual Remote Heated Tinted Glass Mirror Passenger Side
  • 1999 VW Golf (Built After 9/98 Production Date) Manual Remote Heated Tinted Glass Mirror Passenger Side
  • 2000-2005 VW Golf Manual Remote Heated Tinted Glass Mirror Passenger Side
  • 2010-2011 VW Golf (Canada Built Models (1st VIN Digit 2)) Manual Remote Heated Tinted Glass Mirror Passenger Side
  • 1999 VW Jetta (Built After 9/98 Production Date) Manual Remote Heated Tinted Glass Mirror Passenger Side
  • 2000-2004 VW Jetta Manual Remote Heated Tinted Glass Mirror Passenger Side
  • 2005-2010 VW Jetta (8th Vin Digit J or M) Manual Remote Heated Tinted Glass Mirror Passenger Side

This part replaces:

  • OE # 1J1857508J01C
Only 2 left in stock
Part #: 1AMRE01807

How-to Video:

(04:56 min)