1ASTS00813-Toyota Avalon Camry Lexus ES350 Rear Passenger Side Strut & Spring Assembly


Toyota Avalon Camry Lexus ES350 Rear Passenger Side Strut & Spring Assembly TRQ SCA57531

Save 36%
List: $139.95 Save: $50.00
Part 1ASTS00813
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: SCA57531
Vehicle Fit
Warranty & Shipping
How-To & Tools

Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount.  Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.

Strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut

Install Tip: To keep your vehicle operating safely and as designed:

  • Replace your shocks & struts in pairs. This will avoid mixing parts (old and new or brands). Mixing parts can cause variations in movement between the vehicle’s body and wheel, resulting in handling irregularities.
  • Have an alignment performed after replacing your shocks and struts this will ensure proper tracking and protect your vehicle’s tires from premature wear.


Easy install - Pre-assembled, loaded struts
No specialty tools required

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:25)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Seat (1:13)
    • Pop the rear seat cushion of the two hooks with a pry bar
    • Pull the seat cushion out of the car
    • Open the trunk
    • Pull the seat release lever inside the trunk
    • Fold down the seat backs
    • Pop the seat belts out of the side bolsters
    • Remove the 12mm bolts from the bottom of the bolsters
    • Pull the bolsters up and off
  3. step : Removing the Rear Struts (2:48)
    • Remove the upper 14mm bolt from the sway bar link with a 14mm wrench and counterhold with a 5mm allen bit and ratchet
    • Remove the sway bar link from the strut
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 10mm bolt from the ABS line bracket
    • Loosen the 19mm bolts from the bottom of the strut
    • Tap out the upper bolt with a hammer
    • Remove the three 12mm bolts from atop the strut
    • Remove the lower bolt from the bottom of the strut
    • Lower the strut down and out
  4. step : Installing the Rear Struts (11:53)
    • Insert the strut up into place
    • Insert the top bolt into the strut
    • Tap the bolt in with a hammer and punch if needed
    • Hand-tighten the nut
    • Repeat for the bottom bolt
    • Press the strut up and hand-tighten the upper bolts
    • Tighten the three 12mm bolts atop the strut
    • Torque the top bolts to 29 foot-pounds
    • Torque the top and bottom strut mounting bolts to 133 foot-pounds
    • Tighten the 10mm bolt to the ABS line bracket
    • Tighten the 12mm bolt to the brake line bracket
    • Insert the sway bar link into the strut
    • Tighten the upper 14mm bolt to the sway bar link with a 14mm wrench and counterhold with a 5mm allen bit and ratchet
  5. step : Installing the Rear Seat (16:08)
    • Put the side bolsters into place, using the locating tabs
    • Insert the 12mm bolts into the bottom of the bolsters
    • Pop the seatbelts into the bolsters
    • Fold up the seat backs
    • Put the seat cushion into the car
    • Buckle the seat belts to hold the seat belt buckles in place
    • Push the seat cushion into place
    • Clip on the seat cushion hooks
    • Unbuckle the seat belts
    • Position the seat belt buckles
  6. step : Reattaching the Wheel ()
    • Slide the wheel onto the hub
    • Start the lug nuts onto the studs with the tapered side facing the wheel
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    General Tools

  • Center Punch

  • Hex Wrenches

  • 5mm Hex Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench
  • 12mm Wrench

Fits the following Makes:

Year Make Model Description
2007-2012Lexus ES350 Lexus ES350 Rear Passenger Side Strut & Spring Assembly
2006Toyota Avalon Toyota Avalon (Built After 12/05 Production Date) Rear Passenger Side Strut & Spring Assembly
2007-2012Toyota Avalon Toyota Avalon Rear Passenger Side Strut & Spring Assembly
2007-2011Toyota Camry Toyota Camry Rear Passenger Side Strut & Spring Assembly

Part Interchange

Brand Label Part Number
KYB SR4263
KYB SR4112
KYB Shocks & Struts SR4263
KYB Shocks & Struts SR4112
Monroe 172309
Monroe Shocks & Struts 172309
Unity Automotive 15362

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: SCA57531
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota Avalon Camry Lexus ES350 Rear Passenger Side Strut & Spring Assembly TRQ SCA57531-1ASTS00813 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.