WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Radiator Overflow Bottle 1992-96 Toyota Camry
Created on:
Tools used
Slip-Joint Pliers
1. Remove the radiator coolant tank
Use a pair of pliers to remove the clamp on the hose.
Pull the bottle up and out.
2. install the new radiator coolant tank
Insert the bottle onto the mount.
Use the pliers to re clamp the hose to the radiator.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. In this video, we're going to show you replace the radiator overflow bottle, or reservoir, on this '94 Camry. Very easy. The only tool you'll need is a pair of pliers. Don't let anybody tell you this is a hard one to do.
There's a little clip here. You can use a pair of pliers or you could just use your hand. Press that. Twist the hose. I'm just going to use my pliers here. The only thing I'm using my pliers for is to grab onto the hose. Getting it to twist. Pulling it off. Pull your bottle up and out. New one from 1A Auto. You can see, all the same. You might have to cut the hose to fit. Other than that, you can just use either a razor knife or a pair of scissors. Cut the hose to fit. It mounts in there. There's nothing wrong with this bottle. I'm not one to waste a good bottle. I'll just reinstall it. The installation is just as easy as put down. There's a little pin that goes into a rubber stop here. Pin in. Push it down. Push your hose on. Squeeze the clip into place.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company who is here for you on the internet and in person.
ECA92498
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.