This replacement mirror is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
  • Power operation
  • Heated
  • Paint To Match Finish
    • Can be painted by buyer to any desired color, or be installed as is
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has good cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Front Door Panel (0:20)
    • Pry out the trap door in the door pull with a flat blade screwdriver
    • Pry out the trap door in the door handle with a flat blade screwdriver
    • Remove the Phillips screw from the door pull
    • Pry out the clips along the door panel with a trim removal tool
    • Lift the door panel straight up and off
    • Unclip the cables from the door handle
    • Remove the cables from the door handle
    • Disconnect the power window switch wiring harness
    • Remove the door panel
  2. step : Removing the Mirror (2:50)
    • Carefully loosen the vapor barrier with a razor blade
    • Remove the 10mm bolts from the mirror
    • Disconnect the wiring harness
    • Remove the mirror
  3. step : Swapping the Mirror Cap (6:14)
    • Pry off the lower cover with a trim tool
    • Pry off the upper cover with a trim tool
    • Press the cover onto the new mirror
  4. step : Installing the Mirror (8:10)
    • Insert the mirror into place
    • Tighten the 10mm bolts
    • Connect the wiring harness
    • Press the vapor barrier into place
  5. step : Installing the Front Door Panel (10:57)
    • Connect the power window switch wiring harness
    • Connect the cables to the door handle
    • Lift the door panel onto the door
    • Press in the clips on the door panel
    • Tighten the Phillips screw to the door pull
    • Tighten the Phillips screw to the door handle
    • Press on the trim piece to the door pull
    • Press on the trim piece to the door handle

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great product
Looks like original, fits perfectly and installationg is not difficult at all. Electric fuctions work as well. Thanks.
April 12, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2012-2014 Subaru Impreza Power Heated Smooth Black - Paint to Match Mirror Driver Side
  • 2013-2014 Subaru XV Crosstrek Power Heated Smooth Black - Paint to Match Mirror Driver Side

This part replaces:

  • Hollander 128-64247L
  • Partslink SU1320127
  • OE # 91036FJ210
Part #: 1AMRE03202

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(13:50 min)