This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Serpentine Belt 2000-02 Mercury Grand Marquis 4-6L
Created on:
Tools used
A Piece of Pipe (for leverage)
3/8 Inch Drive Ratchet
1. Removing the Serpentine Belt
Familiarize yourself with the belt routing diagram
Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
Pull the tensioner clockwise to loosen the belt
Pull the belt off
Loosen the tensioner
If you are replacing the tensioner, see the 2000 Grand Marquis serpentine belt tensioner video for more detailed instructions
2. Installing the New Serpentine Belt
Loop the belt around the A/C pulley
Bring it around the tensioner pulley
Bring it around the water pump pulley
Bring it around the crank pulley
Bring it around the power steering pulley
Bring it around the idler pulley
Check that the belt is routed correctly
Attach the 3/8 inch drive ratchet to the tensioner
Turn the tensioner clockwise
Pull the belt onto the alternator
Release the tensioner
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service or replace the serpentine belt on this 2000 Mercury Grand Marquis, same as any 1998 to 2002 Grand Marquis with the 4.6 liter V8. The tool you'll need is a 3/8 inch drive ratchet and also a piece of pipe might help for some extra leverage.
It's pretty easy. Right here is your tensioner. Take a 3/8 inch drive ratchet handle. Work it right into your tensioner. If you only have a short handle, use a nice big piece of pipe. It helps you to move the belt easier. Then you can pull it off there. Actually, you can see that my tensioner's in need of replacement because it's not moving freely. When it does that you want to be careful because it could snap back at any minute. Let's take our belt off and out. Let's take our belt off and out.
Before we show you how to put the belt back on you can see we put a new tensioner on the car. If you want to see how we did that, you can just check out our other videos for the Mercury Grand Marquis belt tensioner replacement.
Take a loop, and you want to put it down, all the way down, onto your A/C pulley which is the one furthest down. Then you want to come up, around your tensioner here and then around your water pump and down to your crank pulley, and then across. Over here is your power steering pulley. Then you should be able to kind of pull it a little bit tight and get it up on top of this idler pulley here. Now it's all preliminarily routed. Just make sure it's in the grooves in these pulleys. It looks like it's good. Now take a 3/8 inch ratchet, put it on there. Put on the pipe just to make it nice and easy. Pull this over, and while you do that, pull this up, and on top of your alternator. Then make sure that everything is pushed in. Your tensioner will go back. Make a quick check. It's not quite on my pulley down there. It's around the crank fine. I'm just going to put this back in. Take the tension off a little bit, and push it onto this pulley way down here. Now it's good. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
6K915
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Works
JOHNNIE
October 26, 2020
I would say just as good as oem. I would definitely purchase again.
Customer Q&A
How long is the belt?January 22, 2019
Reverse H
10
This belt is a 6K915, so it has 6 ribs and is 91.5" in length.
January 22, 2019
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Mercury is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Mercury or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.