This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Serpentine Belt 2000-02 Lincoln Town Car
Created on:
Tools used
8mm Wrench
3/8 Inch Drive Ratchet
1. Disconnecting the Battery
Disconnect the negative battery cable with an 8mm wrench
2. Removing the Serpentine Belt
Familiarize yourself with the belt-routing path
Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
Turn the tensioner clockwise to loosen the belt
Pull the belt off the alternator
Slowly release the tensioner
Pull the belt off the other pulleys
3. Installing the New Serpentine Belt
Loop the belt around the A/C compressor pulley
Bring it around the tensioner
Bring it around the idler pulley
Bring it around the water pump pulley
Bring it around the crank shaft pulley
Bring it around the power steering pulley
Check that the belt is routed correctly
Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
Turn the tensioner clockwise to loosen the belt
Pull the belt onto the alternator pulley
Slowly release the tensioner
4. Reconnecting the Battery
Reconnect the negative battery cable with an 8mm wrench
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the serpentine belt on this 2000 Lincoln Town Car with the 4.6 liter V8. The only tools you'll need are a 3/8 inch ratchet handle and an 8mm wrench.
Take the 8mm wrench and disconnect your negative battery cable.
Before you remove your belt, you want to make note of how it's routed. On most vehicles, there's a belt routing diagram, although I don't see one on this Town Car. You can see that it goes down around your crank pulley way down there, around the power steering pulley like that, then up to the alternator, around the idler pulley, down to the AC pulley, and then back up to the tensioner and then around the water pump and down. Removing the belt is quite simple. Right here is your tensioner. It has a 3/8 hole in it right here where you can put a ratchet handle and then you want to move it clockwise. You can see that the belt loosens up so you can take the belt off the alternator. Slowly let your handle back and pull it out. To remove the belt, peel it basically off of your accessories and it's off.
I'm not going to be able to really film this that well but I'll try and explain what I'm doing. I'm going to take a loop, like this, and I'm going to put it down and around the air conditioning compressor, which is down here on the passenger side of the motor. Loop it on there, and then, I'm bringing that right around my tensioner. Then, from there, I'm going to bring this side up and around my idler pulley. This then goes down around my water pump here and then around the crank pulley, which is the largest center pulley. I'm going to bring this off of my alternator and then put it down and around my power steering pulley. Pretty much with everything in place I've got the belt on all my pulleys except for my alternator. I put my wrench on my tensioner, pull my tensioner all the way over. It doesn't want to quite get up to alternator which means I must have something wrong somewhere. It looks like my belt's not quite on my A/C compressor down here correctly. There we go. I'll try that again. Belt comes up around my alternator. Let my tensioner off, and recheck the belt in all the locations and it looks good.
Reconnect and tighten up your negative battery cable and you should be good to go.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
6K915
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Works
JOHNNIE
October 26, 2020
I would say just as good as oem. I would definitely purchase again.
Customer Q&A
How long is the belt?January 22, 2019
Reverse H
10
This belt is a 6K915, so it has 6 ribs and is 91.5" in length.
January 22, 2019
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Lincoln is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Lincoln or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.