Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Mirror Operation:   Power
  • Quantity:   Pair

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Power operation - Moves by using a button Direct replacements
  • Injection molded black plastic housings
    • Can be painted by the buyer to any color desired or installed as is
  • Built to strict quality control standards
  • Unheated
  • Non folding

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:49)
    • Using an 8mm wrench disconnect the negative on the battery.
    • Remove the two T25 screws on the door panel.
    • Remove the panel behind the door handle and disconnect the harnesses.
    • Pry the front edge of the switch panel and pull up and out.
    • Disconnect the harnesses.
    • Pry out the reflector on the side of the door.
    • Remove the three 10mm bolts. One in behind the reflector and two under the switch panel.
    • Pry the door panel out.
    • Lift it up and off the door.
    • Disconnect the connectors.
  2. step : Removing the Mirror (4:19)
    • Pull back the water shield.
    • Disconnect the mirror harness connector.
    • Remove the two 10mm nuts securing the mirror. Use a ratchet and extension for one and a wrench for the other.
    • Pull the mirror free.
  3. step : Replacing the Mirror (5:53)
    • Put the harness down into the door.
    • Line up the mirror and replace the two 10mm nuts. Start them by hand then tighten them.
    • Reconnect the harness.
    • Replace the water shield.
  4. step : Replacing the Door Panel (7:30)
    • Reconnect the harness connectors on the inside of the door panel.
    • Push the other harnesses through the door panel.
    • Put the panel up into place and push down.
    • Push in along the edges of the door to secure the clips.
    • Replace the three 10mm bolts.
    • Replace the two T25 bolts on the door panel.
    • Reinstall the reflector.
    • Reconnect the harnesses to the switch panel and push the switch panel into place.
    • Reconnect the battery.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

  • Wrenches - Metric

  • 8mm Wrench
  • 10mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Morrors
They are a little bigger than the old ones. I can see better.
July 12, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1999Buick LeSabre Buick LeSabre Power Mirror Pair
1991-1996Buick Park Avenue Buick Park Avenue Power Mirror Pair
1992-1999Oldsmobile 88 Olds 88 Power Mirror Pair
1991-1998Oldsmobile 98 Olds 98 Power Mirror Pair
1992-1999Oldsmobile Delta 88 Olds Delta 88 Power Mirror Pair
Part #: 1AMRP00062


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:03 min)