1ADSH00057-Jeep Grand Cherokee Front Driveshaft TRQ DSA86532
false

Replaces

14

Jeep Grand Cherokee Front Driveshaft TRQ DSA86532

99-02 Jeep Grand Cherokee 4.7L (20
$ 109.95
$152.95
28% OFF
$152.95
28% OFF
FREE SAME DAY SHIPPING
TRQ
DSA86532
In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit
Specify your vehicle

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

If your vehicle isn't listed, search Driveshaft


Orders must be placed by 2pm ET
1A Auto Lifetime Warranty

Enter your zip code


Frequently bought together

99-02 Jeep Grand Cherokee 4.7L (20
Jeep Grand Cherokee Front Driveshaft TRQ DSA86532
$109.95
Parts Tray
Dual Magnet Parts Tray
$14.96
Specify your vehicle

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

If your vehicle isn't listed, search Driveshaft

TRQ
DSA86532
In Stock
Product Reviews
Loading reviews
4.00/ 5.0 15
Best price, works as described
C
July 5, 2017
My shop could only find one for about $100 more than this, and the one they found was used. Had this shipped right to the shop, no issues.
Great replacement
Dan
July 10, 2017
Perfect fit, well constructed and hundreds less than other sites.
Absolutely PERFECT!
Jeffrey
December 28, 2017
Perfect fit, AWESOME cost, I would absolutely recommend this part over an oem or reman.
great product for the price
A
February 1, 2018
I will buy more parts as required , Shipped in great condition and works very well . Thank you A
Jeep drive shaft
Dale
June 5, 2018
Excellent part. Timely shipping. Good price. I would strongly recommend your company and will shop with you again for other needs.
Driveshaft and axleshafts
D
November 28, 2019
Im very impressed with the parts getting to my door so fast the only issue I have is that the drive shaft wound up being about an inch and a half too short
Perfect fit.
Frank
June 15, 2020
Bought this front shaft that replaced the original. It fit perfect and works great. Yes, this is worth recommending
fast delivery!!
Mark
June 25, 2020
went online ordered my part boom it was here within a few days i'll order from 1a auto again no questions.
Does not need balancing but does not seem to be good quality
Tyler
August 6, 2020
I installed the driveshaft myself on my 2000 Jeep Grand Cherokee 4x4 4.7L V8 and thought it needed balancing but it was actually grease in the boot causing it to vibrate at speeds >65mph. I found this out the hard way because on the day of installation, the boot ripped while driving on the highway leaving a quarter-sized whole in the side of the boot. This threw grease all over my undercarriage but I was stratified in knowing that I not longer had a vibration until higher speeds (that I would not go anyway). However, recently (now about 2 months and <1,500 miles after installation) I was driving on the highway and the entire boot ripped apart and knocked an ABS sensor connector apart (no big deal since the connector just snapped back together but it was pretty scary for all of that to happen at 60-65mph). There could be underlying issues on my vehicle that would aid in the destruction of the boot but I can't think of anything that would cause that to happen. I will just be purch
Sean
March 21, 2021
Drive shaft virbrates at highway speed's, 45mph +, vibration can be felt and heard. Not sure if its because the shaft has no balancing weights or what but I will be returning.
Bad drive shaft
Nebraskaland
October 18, 2021
The drive shaft is already bad.
Cheap but it broke within 3 months
Josh
November 13, 2021
It broke after being installed for 3 months
Kaz
March 24, 2022
Fast shipping and good pricing
Good
Kent
July 4, 2022
Good!
Is as promised
John
February 3, 2024
It fit like a glove and looked exactly like the old one!
Customer Q&A
Does this shaft come with the bolts?
December 15, 2017
Bryan S
10
No. It does not come with the bolts.
December 15, 2017
L I
10
No but it fits peefect
December 15, 2017
Harry L
10
No, keep your old ones
December 15, 2017
Jason K
10
Mine did not
December 15, 2017
F R
10
No this driveshaft does not come with new hardware (bolts).
December 15, 2017
Jeffrey B
10
Called my mechanic, he said the replacement drive shaft did not come with bolts, he used the old bolts. I believe they were standard bolts, shaft worked fine.
December 15, 2017
Ed L
10
Bolts are not included. You may reuse the existing bolts or purchase from a separate vendor.
December 15, 2017
Alex P
Is this a rebuilt drive shaft and has anyone had a Problem with drive shaft vibration ?
January 5, 2018
F O
10
This is a brand new part. Thanks!
January 5, 2018
Adam G
10
I've had no problems with it no vibrations
July 5, 2018
R E
10
Yes, noise and vibration
May 24, 2021
Gary B
What is the warranty on this product lifetime or 60 days ?
January 5, 2018
F O
10
Thanks for your question! These items have a lifetime warranty on them for vehicle with a factory suspension. Thanks!
January 5, 2018
Adam G
Will this driveshaft fit 2000 Jeep Grand Cherokee Limited 4.7 V8 with Quadra-Drive?
January 7, 2018
F O
10
Thanks for your question! This will only fit on vehicles with the CV style shaft installed at the factory that measures 20" from weld to weld. Thanks!
January 8, 2018
Adam G
10
Yes
August 6, 2018
Harry L
Why wouldn't this fit the 4.o motor jeep?
August 6, 2018
Lindo S
10
This part is listed to fit the 4.7L model, not the 4.0L model, due to vehicle design differences.
August 6, 2018
Peter L
10
I am almost sure that the length is not the same .
August 6, 2018
A N
10
Is your jeep select drive or quadra drive ?
August 6, 2018
L I
10
It may have a different transfer case. Here are the different transfer cases: nv-247 and the nv-242. The Nv-247 is paired with the quadra-trac 11 and the quadra drive which are full time 4wd systems. It also uses the cv type drive shaft. I do not think there is a difference in drive shaft with the 4.0 and 4.7 if it uses the nv 247 transfer case. It may differ with Select-trac which is paired with the nv242 4wd system. 4.0 uses the 242LD and the 4.7 uses the 242HD. I would recommend doing some research first.
August 6, 2018
J U
10
This driveshaft has a specific length for a "quadra-drive" t-case and V8. The 4.0 shaft may be different length and may also have different couplers ie: Rzeppa / U-joint / etc. Unfortunately WJ's have several different driveshaft setups.
August 6, 2018
Ryan H
10
There are two different styles one has u joints the other has cv joints
August 6, 2018
Harry L
10
Length is different due to the location of transfer case in relation to the front differential. 6 cylinder 4.0 is longer than the 4.7 V8, so the transfer case sits farther back in the vehicle.
August 6, 2018
Michael B
10
We have the 4.7 V8 it was to long and could not switch the end cuz ours has the fine splins
September 17, 2018
David E
Will this shaft work with the Quadra Drive system?
February 24, 2020
Willie B
10
Yes, quadradrive is inside the differential. Only thing that matters on the drive shaft is that you match the proper yoke to your jeep. Either CV style or repezza U joint.
February 24, 2020
N O
10
I had a 2000 quadra 4.7l and worked fine.
February 24, 2020
J U
10
Yes
February 24, 2020
J A
10
Thank you for your inquiry! The fit of this specific product is not dependent on if the vehicle is or is not equipped with the Quadra Drive system. In order to confirm the fit of these parts you would need to know the engine size, the length of the OE shaft from weld to weld, as well as if the OE shaft was a CV joint style or U-Joint style. This particular product is specific to models with a V8 4.7L engine, has a 20 Inch measurement (weld to weld) and is also the CV Joint Style Design. Please let us know if you have any further questions, thank you.
February 24, 2020
Jessica D
What is the overall length of drive shaft?
April 7, 2020
R O
10
The measurement from weld to weld is 20 inches.
April 7, 2020
Corey M
What is the overall length? 35" or 34 1/2 inches?
April 14, 2020
Blazedpud B
10
Thank you for your inquiry. Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals. Please let us know if you have any other questions. Thank you!.
April 14, 2020
T I
Do I need to buy grease for this driveshaft?
March 4, 2021
Brandon T
10
No grease is needed. Each joint is prepacked with grease.
March 5, 2021
Andra M
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

Year
Make
Model
Options
Drivetrain

This part doesn’t fit a . Select from parts that fit.

Show parts that fit
Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Search by part number or keyword

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Driveshaft

This part will only fit a vehicle with these options.

If your option isn't listed search Driveshaft