• Brand New Delphi Ignition Coil
  • Direct replacement
  • Built to strict quality control standards


Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed


Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Loosening the Intake Manifold (0:37)
    • Remove the oil fill cap
    • Remove the engine cover
    • Remove the 13mm bolts from the top of the intake manifold
    • Loosen the air intake hose clamp
    • Pull the air intake box off
    • Loosen the stud with a 10mm wrench
    • Loosen the 18mm bolt to pull back the bracket from the hose
  2. step : Removing the Ignition Coil (2:02)
    • Loosen the 10mm bolt on the ignition coil
    • Pry off the ignition coil sensor harness
    • Lift the intake manifold
    • Remove the ignition coil
  3. step : Reinstalling the Ignition Coil (2:38)
    • Insert the ignition coil into place
    • Connect the ignition coil sensor harness
    • Tighten the 10mm bolt to the ignition coil
  4. step : Tightening the Intake Manifold (3:05)
    • Preliminarily tighten the 13mm bolts to the top of the intake manifold
    • Torque the 13mm bolts to 20 foot-pounds
    • Tighten the stud with a 10mm wrench
    • Tighten the 18mm bolt
    • Press the intake box to the intake manifold
    • Tighten the hose clamp
    • Insert the engine cover in place
    • Tighten the oil cap

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2009 Buick Enclave Ignition Coil Delphi GN10309
  • 2005-2008 Buick LaCrosse Ignition Coil V6 3.6L Delphi GN10309
  • 2004-2006 Buick Rendezvous Ignition Coil V6 3.6L Delphi GN10309
  • 2004-2009 Cadillac CTS Ignition Coil V6 3.6L Delphi GN10309
  • 2005-2006 Cadillac CTS Ignition Coil V6 2.8L Delphi GN10309
  • 2004-2006 Cadillac SRX Ignition Coil V6 3.6L Delphi GN10309
  • 2005-2009 Cadillac STS Ignition Coil V6 3.6L Delphi GN10309
  • 2009 Chevy Traverse Ignition Coil Delphi GN10309
  • 2009 GMC Acadia Ignition Coil Delphi GN10309
  • 2006-2009 Saab 9-3 Ignition Coil V6 2.8L Turbo Delphi GN10309
  • 2009 Saturn Outlook Ignition Coil Delphi GN10309

This part replaces:

  • Delphi GN10309
  • Hollander 610-02864
  • OE # 12629037, 12565659
Part #: DEECI00006

Brand #: GN10309

How-to Video:

(04:49 min)