Replaces
Part Details
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hey, I'm Brian, I'm here to give you guys a little tutorial on some window regulators. The specific design is the scissor design. We actually get a lot of calls on these products here and the common question is: The part I received seems different than the part in my vehicle.
The scissor design actually has a flip design and we're actually going to show you how to fix this here. The most common thing that you want to do, or the first step you want to do is lay the parts out side by side. Try not to match them up in the car because this can get confusing. Take it out, lay them side by side, and what you actually see here is a same exact part for the same model vehicle in the same door. As the appearance shows here, they seem to be mirrored.
If you look down at the bottom here, we have the power window motor. This is the piece that is actually powered to lift and lower your glass. The next section down here is . you actually have your gear drive. Here's your mounting plates on both. As you can see, it's identical. You have your tension spring here. If you notice on the upper section here, it's kind of reversed. You're going to think normally, I get the wrong side door. You're going to give us a call and you want to express that to one of our customer service reps. I'm going to show you how to fix this.
Basically, pick this up by the base and you want to scissor or flip. This is how you're going to fix the issue. It's going to actually match the component as shown there. You can now see that both of these components here are the same part and you're ready for installation.
You should be good to go. Click on Subscribe or check us out at 1AAuto.com. We'd be more than happy to have you join on board and join the 1AAuto team.
Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear window regulator on this 1998 Honda Civic. It's the same part and process on these Civics from 1996 to 2000. We show you on the driver side, but it's the same procedure on the passenger side. The items you'll need for this is a new rear window regulator from 1AAuto.com, a flat blade screwdriver, a Phillips screwdriver, and a 10mm socket and ratchet.
Start off by prying off your pull handle panel. Behind here, there are two Phillips screws: one here and one here. You want to remove this Phillips screw up here as well. We'll just fast-forward as Don removes those. Disconnect this harness by just pushing in on the tab and pulling it out. Then pull back on your door handle and it pulls out, and you just want to pry this clip off your door handle rod and then push your door handle down and out. Pry out around the edges of your door panel to release the clips, and then your door panel just lifts up and off. Carefully remove your water shield without damaging it.
Right here on your window regulator, you'll see these two bolts. These are what hold the window to the regulator. When the window is down here, that's pretty easy to access, but if your window is stuck up, you're going to need to use a 10mm wrench and reach down through the top of the door here and remove the bolts that way. Then, once you remove those bolts, you just take the window up. We'll just fast-forward as Don removes those two bolts. When the bolts are removed, you want to just pull the window up and tape it into place. Pull the clips on the harness from the door, disconnect the harness, push the tab, and pull it apart. Right here, you'll see there's four 10mm bolts. You want to go ahead and remove those and we'll just fast forward as Don does this. Once you have the bolts out, then the window regulator will just pull right out the large hole in the door.
On the left is the old window regulator; on the right is the new one from 1A Auto. You can see they're identical, and they're going to mount up exactly the same. Replace the two top bolts on your new window regulator, and you're going to just use these to hang the regulator back inside the door. Once the bolts are in place, feed the regulator up into the door and just clip those on as you can see right there, and then we'll fast forward as Don replaces the other two bolts and then tightens all four of them up. Pull the harness out through the door, reconnect it, and then clip that harness back on to that clip on the door.
Now, you want to remove the tape, and you want to apply pressure to the window when you do this so it doesn't fall and lower the window on to the rail. You need to angle the rail and line it up. You can see I'm just checking on there making sure all the holes line up. Now, you want to just replace those two 10mm bolts. It's easier to just put both of them in by hand, and once you get them started, then you can tighten them up with that 10mm socket and ratchet. It's important that while you're tightening them up, you'll see the rail will start to slide out, just make sure you keep it lined up.
Now, replace your water shield and make sure you pull the harness through. Replace your door panel. Just lift it up on to the window sill and push it down over the lock and into place. Just hit in the clips around the edges. Reconnect your harness. Put the door handle rod down to the hole on the door handle and then push that clip back on to the rod. Push your door handle into place and then slide it back. Now, we'll fast-forward as Don replaces those three Phillips screws. Stamp your door pull handle panel back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
WRA51648
