Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Install Replace Master Power Window Switch Honda Accord 1994-97 1A Auto
Created on:
Tools used
Phillips Head Screwdriver
1. Remove the master power window switch
Remove the screw in the door pull with your Phillips screwdriver
Pull the door pull panel up and out.
Disconnect the wiring.
Remove the three Phillips screws.
Carefully pull the power window switch out of the panel.
2. Install the new master power window switch
Insert the switch into the bezel
Secure with the three Phillips screws.
Connect the wiring.
Clip the switch panel down into the door panel.
Secure with a Phillips screw at the bottom of the door pull.
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm on of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing you how to replace the master power window switch on the driver's door on this 95 Accord. Same as any '94 to '97 Accord 4-door. This switch can get damaged by rain or you can spill things on it. Also, it can just wear out over time. Pretty easy to replace. This screw right down inside the handle, once that screw's up and out, it's going to take some force. There are some clips that lock this in. You basically just press in and up and then slide it out. You can see on this one of my clips is broken. Now to remove these connectors you can see each one has a little tab you can press right there with your thumb. Then pull it out. That's the one for the mirror. Here, these are the ones for the power window. The tabs are on the backside, so I'm pressing with my finger on the tab and working it out. Take the screw out. There's the panel out.
We do sell the panel in certain colors. To get the switch out of this bezel, there should be 3 screws. One here, here, and 1 down here. This car for some reason only has one screw, so I'm going to remove that. Now the switch comes off. Our new switch from 1A Auto, it looks a little different because it's more of a sealed unit, but it has the same mounting holes here, here and down here as the original. It goes on. Screw down in. You may need to kind of line up the screw as it goes down just to get it into the right section here. Press the switch down in. Tighten up the screw and now to do this right I'll go get a couple more screws to fix it correctly. Once you do the other screws just like the original, plug in this one, then plug in this guy. Then hook up the mirror as well. Just got to press it in. The switch all works. Off position, nothing works. With everything hooked up, I'm going to push the inside down in. Push the switch in. Push it forward. Push everything back down in. Then with your phillips screw and screwdriver, put it in, tighten it up, and you're all set to go.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
BSS01560
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.