Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

This pair of rear wheel opening rust repair panels is just what you need to get your vehicle in good looking form again!

Features the following specifications:

  • Comes as a Pair for the rear wheel openings
  • One piece stamped 18 Ga. steel construction
  • Dimensions: 41 1/2" long x 16" high
  • Painted in PPG primer
  • Made to strict quality control standards
  • Extra large to cover more area than needed

 

Now you can buy for yourself what has only been made available to bodyshops for years. Replace that rusted out, dented, or damaged wheel openings now and bring that luster back to your truck!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Warranty

Please inspect this part carefully prior to installation and contact us with any questions BEFORE attempting to install it. Due to the nature of this part, our 60-day warranty covers exchanges only. Parts that have been installed, neglected, or modified in any way are not eligible for this exchange.

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
They fit perfectly!! I did cut off the rusted section of the fenders and then welded them in place. Turned out real nice.
February 2, 2017
Great panels. Makes the job easy. Without these panels, I would have to purchase sheet metal, cut and form pieces together but would still have trouble forming the wheel well . Not to mention all that bondo.
March 1, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have 96bronco with rust on back fender will these cover fenders?
Alexa U March 24, 2016
1987-1996 Ford Bronco Rear Wheel Opening Patch Panel Pair Works on wheel well arches
Brian F March 24, 2016
they will cover from the wheel well up to the body line. Trace them out on the rear quarters and cut them out and weld these in
Billy S March 24, 2016
I Alexa, I bought the same panels for my bronco and they fit rite over the old wheel wells. They only thing I had to trim back was on the drivers side around the gas tank filler door... good value ,good quality..I was happy with the final product. ...signed P....
Paul S March 24, 2016
Covers existing for dimensions shown
Robert R May 3, 2016
Id have to see how much rust you got but these are wheel well patches they go up about 6 inches before the truck bed
C O September 17, 2017
Are these designed to be welded into place?
Jeremy G February 2, 2017
yes
THOMAS J February 2, 2017
Yes, but its a spot weld. Not a full line all the way across because it will warp from the heat. I like the way they fit same curves as my truck. This is a great deal as well. Good luck on your body work.
Melissa H February 2, 2017
I put several rivets to hold the panel in place and then spot welded the panel in place. Then I removed the rivets with a grinder and welded the holes where the rivets were.
Cliff W February 2, 2017
Yes
Travis S February 2, 2017
Yes. What I did was cut them to just cover the missing parts of the bed and welded it on. It was tricky because the metal on the truck was so thin. They could be riveted on as well but I didnt want it to be that noticeable.
Samantha I February 2, 2017
yes
Raymond P February 2, 2017
you could spot weld be carefull no to warp
Scott T February 2, 2017
HI Jerry These panels can be either welded into place ,pop riveted , or spot welded depending on your skill set . I mig welded the panels in on my 95 bronco with a very low setting as not to burn through. I have also installed them an my 96 f250 and had only spot welded those which had been much easier using harbor freight 240v spot welder. . I would recommend these panels to anyone needing a great replacement panel with minimal adjustments to be made.. Paul S
Paul S February 4, 2017
Does this pair come with both sides of the bed?
Jeffrey R May 7, 2017
Yes
Kay P May 7, 2017
Well yea its in the description just Dont give them your email theyll blow it up the panels were on my porch two days later
C O September 17, 2017
Yes
M A August 4, 2018
Year Make Model Description
1987-1996Ford Bronco Ford Bronco Rear Wheel Opening Patch Panel Pair
1987-1996Ford F150 Truck Ford F150 Truck Rear Wheel Opening Patch Panel Pair
1987-1996Ford F250 Truck Ford F250 Truck Rear Wheel Opening Patch Panel Pair
1997Ford F250 Truck Ford F250 Truck Super Duty Rear Wheel Opening Patch Panel Pair
1987-1997Ford F350 Truck Ford F350 Truck Rear Wheel Opening Patch Panel Pair
Part #: 1ARPS00001


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout