Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount. Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.
Strut & spring assembly contains:
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Once you have your vehicle safely raised and supported, you're going to remove all five lug nuts using a 21 millimeter. Carefully remove the wheel, set it aside. The next thing we're gonna do is remove the sway bar link from right here. If you use an 18-millimeter wrench, you can come right inside the backside there and grab onto that, and then an 18-millimeter socket and remove these two. Pull this pull pin off. There we are, that gives us plenty of slack there. Now we're going to use a 10-millimeter right here and remove this one. Let's get the 10-millimeter one here. The next thing we're going to remove is the bolt that holds the knuckle to the strut. Use an 18-millimeter, and then be careful because this will come up and swing around. There we are, and we'll leave that right there. Do the lower one. Same thing, watch out for that thing that comes around. This one looks like it had rotted off so I'm going to grab that with some pliers. All right. Both those bolts are the same. Now I'm going to use a pry bar, come right in between the knuckle and the shock strut. Just kind of pry apart, but be careful because you have your brake line still attached. There we are. Now you just want to hang this so it doesn't put any pressure on your ABS or your brake hose. Use a 13-millimeter, remove these four nuts. Leave that one on there a couple threads. Set those aside. Now I'm going to hold up the shock, remove this nut, take it right out. Awesome.
Let's get ready for install. Okay, getting close. There we go. That was easy. TRQ strut comes with brand new locking nuts so I'm gonna use those. If for some reason you weren't, I would definitely use some threadlocker. Let's bottom these out. Let's torque these to manufacturer specifications. Let's torque these to 26 foot-pounds. Torqued. Let's get this off of here, line this back up. We've got our two bolts. I like to use a little bit of threadlocker on these. And our nuts, that on there. This one's a little bit harder to get to. It's gonna push that bolt out a little bit so I can get the nut on there. Let's bottom these out. Let's torque these bolts to 148 foot-pounds. Torqued.
Let's get the mounting bracket for the brake hose back on here. Make sure you tighten that up. Now clip in the little clip for your ABS wire. Perfect. Okay, now let's bottom these out. Use your 18-millimeter right there, 18-millimeter on this side as well, snug them up. Let's torque these to 85 foot-pounds. Get the wheel back up on here. Start on all your lug nuts and then bottom them out. Now we're gonna bring this down and torque it to manufacturer specification. Now with the vehicle's wheel touching the ground but most of the weight of the vehicle off of it, we're going to torque these in a star pattern to 100 foot-pounds. Torqued.
Tools used
Once you have your vehicle safely raised and supported, you're going to remove all five lug nuts using a 21-millimeter. Carefully remove the wheel. Set it aside. The next thing we're going to do is remove the sway bar link from right here. If you use an 18-millimeter wrench, you can come right inside the backside there and grab onto that. And then an 18-millimeter socket and remove these too. Now, it's time to take off the lower portion of the sway bar link. I'm just gonna use my 18-millimeter right there. And I'm gonna try to get my 18-millimeter socket with ratchet on the backside where the nut is. Okay.
Awesome. Just get the sway bar link in here. Put those nuts on there. Okay. Now, let's bottom these out. Use your 18-millimeter right there, 18-millimeter on this side as well, snug them up. Do the same to the lower. Let's torque this to 85 foot-pounds. Do the same to the lower one if possible. If it's not possible, just take your 18-millimeter wrench and give it a couple bonks with your rubber mallet so it's nice and snug. Let's get the wheel back up on here. Start on all your lug nuts and then bottom them out. Now, we're going to bring this down and torque it to manufacturer's specifications. Now, with the vehicle's wheel touching the ground but most of the weight of the vehicle off of it, we're going to torque these in a star pattern to 100 foot-pounds. Torqued.
