This replacement Ford Bronco or pickup truck mirror is just what you need to get your vehicle in good looking form again!

This new, aftermarket replacement mirror assembly features the following specifications:

  • LH (driver's side)
  • Injected molded black plastic housing
  • Folding
  • Manual Operation - Push on glass to move mirror
  • Can be painted to any color desired or installed as is
  • Mounts on the door
  • Direct replacement
  • Built to strict quality control standards
  • Unheated

We have noticed that there are many inferior quality mirrors on the market. We have researched other mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket mirrors available. So don't be fooled by cheaper made imitation mirrors. Go with superior quality!

This Ford truck mirror makes a great replacement and has substantial cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Part Details

  • Mirror Operation: Manual
  • Mirror Color / Finish: Smooth Black - Paint to Match

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:50)
    • Open up the window crank by pulling out at the base of the handle. Remove the T20 bolt in the window crank.
    • Remove the window crank.
    • Remove the two Phillips screws in the door panel.
    • Use a door panel clip tool or putty knife to pry out all the clips around the edges of the door panel.
    • Pull the door panel up and off.
  2. step : Removing the Side Mirror (2:40)
    • Remove the 8mm bolt securing the mirror from the inside.
    • Remove the two T25 torx bolts securing the mirror from the outside.
    • Pull the mirror up and out.
  3. step : Replacing the Side Mirror (3:37)
    • Take the insulation pad from the end of the old mirror and glue it on to the new mirror.
    • Feed the new mirror down into the door.
    • Replace the two T25 bolts.
    • Replace the 8mm bolt.
  4. step : Replacing the Door Panel (5:03)
    • Pull the door handle through the door panel.
    • Line up the door panel up and over the lock.
    • Push the panel into place.
    • Replace the two Phillips screws.
    • Replace the washer and window crank.
    • Replace the T20 bolts.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver
  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Ford Bronco Manual Smooth Black - Paint to Match Mirror Driver Side
  • 1992-1996 Ford F150 Truck Manual Smooth Black - Paint to Match Mirror Driver Side
  • 1992-1996 Ford F250 Truck Manual Smooth Black - Paint to Match Mirror Driver Side
  • 1997 Ford F250 Truck Manual Smooth Black - Paint to Match Mirror Driver Side
  • 1992-1997 Ford F350 Truck Manual Smooth Black - Paint to Match Mirror Driver Side
  • 1992-1997 Ford F450 Truck Manual Smooth Black - Paint to Match Mirror Driver Side

This part replaces:

  • Partslink FO1320115
  • Hollander 128-324AL
  • OE # F7TZ 17683 DAA
Part #: 1AMRE00242

How-to Video:

(06:57 min)