Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Third Brake Light Housing 2002-12 Ford Explorer
Created on:
Tools used
Gloves
Phillips Head Screwdriver
1. Removing the Third Brake Light
Remove the two Phillips head screws from the third brake light
Peel the brake light lens off the vehicle
Disconnect the window washer hose
Disconnect the brake light wiring harness
Press the washer nozzle out of the brake light with a flat blade screwdriver
2. Installing the Third Brake Light
Position the washer nozzle on the brake light with the sprayer pointed down
Snap the nozzle into the brake light
Connect the wiring harness to the brake light
Connect the washer hose to the nozzle
Insert the two Phillips screws into the brake light
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over thirty years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by a hundred percent satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence, and that saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2006 Ford Explorer. We're going to show you how to remove your third brake light assembly so you can change out the housing. If you like this video, please click subscribe. We have a ton more information on this truck as well as man other makes and models, and if you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com.Here are the items you'll need for this repair.
To remove the third brake light cover, we'll remove these two Phillips head screws. Once our two screws are out, reach underneath the lens. Carefully peel it up off of the car. Disconnect the hose here for the rear window washer, and the electrical connector at the end by pushing down and pulling it away.
To remove your rear window washer nozzle, simply take a small flat blade screwdriver, press down on one tab while pulling down with your finger. You'll see you get the gap there. Keep pulling down there, press in on the other side, and pull it out of your third brake light housing.
Take your new rear window washer nozzle, being sure that the spray end is facing down into the flat portion of our third tail light. Snap it back into place. Reconnect the electrical connector. The push tab faces into the back of the housing. Reconnect your rear window washer nozzle hose. Lay the cover back into place, and reinstall your two Phillips head screws.
Check for proper operation of your third brake light and rear window washer nozzle, and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
923-225
In Stock
Product Reviews
Loading reviews
5.00/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
Just like new
Brian
May 9, 2016
Easy to install. Didn't have to trim hose for washer fluid dispenser. Bright bulbs. You will notice how many other cars have their lights out after you replace the one on your car
High quality!
Rufus-c
July 12, 2017
Very nice replacement part! Installs easily, fits perfectly, looks great! Fast shipping and a fair price. What more do you want?
Excellent Product
D
August 28, 2018
This replacement high-mount brake light lens is very clear and very easy to install and the price is just right.
Love the Video Instruction
C
March 25, 2019
The parts were delivered timely and easy to select. The how to video made the installation a snap!
2006 Ford explore
Wesley
August 12, 2020
Excellent product fit like it should be easy install excellent shipping excellent price once again thanks One a auto thank you
Good purchase
Eric
December 13, 2021
Exact fit. Quality material.
2006 Ford Explorer high brake light replacement.
Terry
November 22, 2023
This light was a perfect replacement for the malfunctioning original. Shipment was prompt and installation was a breeze.
Customer Q&A
does this product have a window washer fluid dispenser?May 7, 2016
Diane W
10
Yes it does...On the picture, it is the black dot to the right of the lens. Of course your water tank is up front by the engine but this lens has the hose connection on the backside....Really easy to install...
May 7, 2016
Thomas W
10
Yes
May 9, 2016
Brian L
10
yes it does
May 9, 2016
Brian F
Does it come with the bulbs?April 20, 2022
John D
10
Yes this comes with bulbs, ready to be installed!
April 20, 2022
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET