Replaces

Ford Lincoln Mercury Front Driver or Passenger Side Wheel Bearing & Hub Assembly TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) Front
  • Direct replacement
  • Fits 5 Lug Wheel
  • Wheel studs already installed

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA53907 Axle / Spindle Nut Torque Specification

  1. step : Remove Wheel (1:09)
    • Remove hub nut
    • Remove lug nuts and remove wheel with an 18mm socket.
  2. step : Remove tie rod (1:50)
    • Remove cotter pin.
    • Use your 18 mm socket to remove the nut at the bottom of the tie rod.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Remove the axle. (2:42)
    • Disconnect the brake line bracket and ABS sensor
    • Remove the upper stabilizer bolt with an 18mm wrench and a 10 mm wrench to secure it.
    • Remove the lower stabilizer bolt using your 18 mm wrench to secure it and a 21 mm socket.
    • Use a hammer to drive the bolt all the way out.
    • Move the steering knuckle off the strut with a hammer.
    • Tap the axle with a hammer and use a pry bar to pry it out of the steering knuckle.
    • Pry the other end of the axle out.
  4. step : Remove Brake Caliper (6:00)
    • Use your 12mm and 15mm socket wrenches to remove the calipers and caliper brackets.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
    • Use a wire tie to secure the caliper up out of the way.
  5. step : Remove the brake rotor (7:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  6. step : Remove Hub (7:08)
    • On this vehicle, the hub is cast iron and the knuckle is aluminum, seizing is a potential issue.
    • Use an air hammer and protective eyewear to break the hub free if this happens.
    • Remove the hub with a hammer.
    • Clean up any corrosion with a wire brush.
  7. step : Install new hub (9:26)
    • Use some penetrating oil or anti-seize grease to prep the knuckle for the new hub.
    • Put the three 15 mm bolts in place and tighten the nuts to 70 ft lbs.
    • Check out our other videos to see how to finish putting everything back together.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands
  • Wire Brush
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 11mm Socket
  • 18mm Socket
  • 14mm Socket
  • 21mm Socket
  • 10mm Socket
  • 12mm Socket
  • 17mm Socket
  • 20mm Socket
  • 19mm Socket
  • 13mm Socket
  • 16mm Socket

  • Specialty Tools

  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench
  • 10mm Wrench
  • 13mm Wrench
  • 17mm Wrench
  • 12mm Wrench
  • 15mm Wrench
  • 14mm Wrench
  • 11mm Wrench
  • 16mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Wow... such a great company to deal with!
I have ordered from 1A Auto many times in the past, and I have never been unhappy with the quality of the parts or the professionalism of their staff. Great prices, high-quality parts, and great people, a winning combo!
December 10, 2018
Great part great price
Wheel bearing went bad on my car so i ordered one from here as i always come to 1a auto for my parts. It came sooner than expected and it installed easier than i could of imagined it has held up through some tough conditions and i would recommend it to anyone looking for quality at an awesome price
January 2, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1996-2007Ford Taurus Ford Taurus Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1995-2002Lincoln Continental Lincoln Continental Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1996-2005Mercury Sable Mercury Sable Front Driver or Passenger Side Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930179
Drive Tech America NT513100
Ford F50Y-1104A
Ford F8RZ-1104AA
Ford XF12-2C300BB
Ford XF1Z1104BA
Ford XF1Z-1104AE
Ford XFI2-2C300BB
Ford 3F13-2C300BA
Ford 3F1Z-1104-BA
Ford OEM XF1Z1104BA
Ford OEM 3F13-2C300BA
Ford OEM F50Y-1104A
Ford OEM 3F1Z-1104-BA
Ford OEM F8RZ-1104AA
Ford OEM XF12-2C300BB
Ford OEM XFI2-2C300BB
Ford OEM XF1Z-1104AE
GMB 725-0006
Green Ball WH885
MOOG Hub Assemblies 513100
Mevotech H513100
Motorcraft HUB-12
Raybestos 713100
Raybestos Brakes 713100
SKF BR930179
Timken 513100

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHF00025
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53907