Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
All right friends, just right off the bat, I want to let you know you're gonna have eight ignition coils for this. You're gonna have four on the driver's side back and four over on the passenger side. Overall, the process to replace all of them is gonna be the same. So I'm gonna do one, show you how, and then you can handle the rest.
Before we get into taking anything apart, let's go ahead and blow off the external areas where any dirt or debris may be. Now, looking along the passenger side, we can see the forward coil and then, of course, all the rest going down the line. There's gonna be a mounting bolt on each one and there's gonna be one wiring harness to each one as well.
Start off by removing the wiring to each one. Always check to make sure you don't see any funny colors. Set that aside, then remove the 7-millimeter mounting bolt. Now, with that that bolt's out, go ahead and grab the coil. Give it a little twist and draw it right up and out. There it is, friends.
Okay, friends, before we can go ahead and install our brand new coil, we wanna go ahead and apply a little bit of dielectric grease to this lower aspect right here. That's where the spark plug is gonna go in. And then we'll, of course, go into this electrical connector a little bit right there. At this point, we're ready for our install. Let's get it into the truck. All right, down on there. Start in your bolt then snug it up. Torque it to 53-inch pounds.
Okay, that's bottomed out. Let's reinstall that electrical connector. Listen for the click, give it a nice tug, do the same to all. Okay friends, so after you have all your coils in there, go ahead and start up your engine. You wanna make sure that you don't have a check engine light. If you do, make sure you just double check everything that you've done, and you didn't leave anything unplugged.
