This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Part Details
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hey, everyone. Sue here from 1A Auto. And today I want to talk to you about our dual laser light park assist tool. It's like a sensor. So this gets mounted in the center of your garage, whether you have two bays or one bay. There's two laser lights that can be pointed. You can move them around. And it's for the people that, say you have an extra deep garage, or even a shallow garage and the nose of your car is just right there, and you never want to hit that wall and damage your car. So mount this up there. I'll give you a little short video on how to mount them.
And you can aim the light right at the hood. And that light comes on, which is motion sensor, as soon as you pull in. And you line the beam right up on your hood, and you know that's the proper distance. If you need this part or any other part for your car, click on the link below and head on over to 1aauto.com.
So here I'm going to hang the laser guide for the garage parking. And I'm going to use the bottom of my car here that have on a lift as a reference to your garage ceiling. So we're going to use the table as the wall. And I'm going to clean a spot under here on my spare tire connector. And I've just got some double-sided velcro, because obviously I'm not going to leave it attached to the car. And I'm just going to line this up, and hang it just as if it was the ceiling in the garage. And now I'm going to get my car and bring it in, and aim my lasers at where I want my car to stop. So what I did was mount that on the trunk of a car just for a reference because obviously our ceiling height is too high. I put the table as the wall in your garage. And every vehicle is going to be different. So it all depends on what kind of car you have and where you can visually see on your hood.
So on this little Mini, I can't see over the hood. I'm 5'1
