This replacement mirror is just what you need to get your Dodge truck in good looking form again!

This Dodge truck mirror features the following specifications:

  • Driver Side
  • Power operation
  • Folding - Can lay flat against the door
  • Heated
  • Direct replacement
  • Injection molded black plastic housing
  • Can be painted by the buyer to any color desired or installed as is
  • Built to strict quality control standards

We have noticed that there are many inferior quality mirrors on the market. We have researched other mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket mirrors available. So don't be fooled by cheaper made imitation mirrors. Go with superior quality!

This Dodge truck mirror makes a great replacement and has substantial cost savings over a Dodge mirror.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (1:13)
    • Remove the 10mm bolt behind the door handle.
    • Remove the two Phillips screws in the door pull cup.
    • Remove the Phillips screw on the triangular panel.
    • Pry the door panel out with a putty knife and find the clips. Pull out near the clips to release them. Do this around the door panel.
    • Disconnect the harness from the switch panel.
    • Disconnect the mirror switch.
    • Remove any clips left in the door and put them back into the door panel.
  2. step : Removing the Side Mirror (4:20)
    • Remove the foam insert at the top of the door.
    • Disconnect the connectors.
    • Remove the three 10mm nuts that secure the mirror.
    • Pull the mirror out.
  3. step : Replacing the Side Mirrors (5:48)
    • Run the harness down through the door.
    • Line up the mirror and put it into place.
    • Replace the 10mm nuts. Make sure no wires are pinched behind the mirror.
    • Run the harness through the reinforcement plate (If towing mirrors are being installed).
    • Connect the connectors.
    • Replace the foam insert.
  4. step : Replacing the Door Panel (8:53)
    • Reconnect the harnesses.
    • Line up the panel over the lock.
    • Line up the clips and push the door panel into place.
    • Replace the three Phillips screws.
    • Replace the 10mm bolt behind the door handle.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Arrived quickly and was easy to install. Works great!
November 23, 2017
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2001 Dodge Ram 1500 Truck Power Heated Textured Black Mirror Driver Side
  • 1998-2001 Dodge Ram 2500 Truck Power Heated Textured Black Mirror Driver Side
  • 2002 Dodge Ram 2500 Truck Power Heated Textured Black Mirror Driver Side
  • 1998-2001 Dodge Ram 3500 Truck Power Heated Textured Black Mirror Driver Side
  • 2002 Dodge Ram 3500 Truck Power Heated Textured Black Mirror Driver Side

This part replaces:

  • Partslink CH1320168
  • Hollander 128-1304L
  • OE # 55076489AE
  • TYC 4310032
Part #: 1AMRE00129

How-to Video:

(10:32 min)