Replaces
BHS11523
This part doesn’t fit a . Select from parts that fit.
Specify your vehicle's year, make and model to guarantee fit.
This part doesn't fit a . Select from parts that fit.
Buy in the next and
Recommended for your 2005 Dodge Stratus
Frequently bought together
Specify your vehicle's year, make and model to guarantee fit.
This part doesn't fit a . Select from parts that fit.
Part Details
Specifications
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
This replacement Mitsubishi Eclipse interior door handle is just what you need to get your vehicle in good looking form again!
Specifications:
This interior door handle is a direct bolt on and is built to strict quality control standards.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and reinstall the rear inside door handle on this 2004 Dodge Stratus, the same as any 2001 to 2006. Tools you'll need are a flat blade screwdriver, Phillips screwdriver, a door panel clip tool or a putty knife, and a T20 Torx driver.
To remove the rear door panel we're going to look inside the cup here, and you'll see a little trapdoor. Use a small flat blade screwdriver, pull that up and you can see there's a Phillips screw in there. Same thing here, another Phillips screw and then there are two Phillips screws on the bottom: one there, one there. Once the screws are out put your hand underneath, and then you want to go around the edge of the door panel. You'll get towards the clips and pull them out. Sometimes they can be very difficult to release. There's also a couple up top here.
Lift the door panel up. Behind there's a little clip here. Use your thumb, pull that off. Your harness for your windows is down here. There's a little tab. Push that tab and disconnect it. You may find a couple of your clips don't come with the door panel. Just pull them out and then reinstall them back into their spots on the door panel, and they're ready to go.
Once you have the door panel off, the back of the door handle is right here. Use a T20 Torx driver to remove the screws. Remove two Torx screws. Now your handle comes out.
A lot of times what happens is they break right in here or this shaft breaks. Mine's in fine shape, so I'm just going to reinstall the original and put it back in. There's three little line up grooves that go on three pins in here. When you tighten up those screws, tighten them firm, but don't over-tighten them.
To reinstall the door panel, take your power window harness and plug it in. Take your rod, put it into the door handle, flip the clip around. Put your panel up over your lock knob there. There's a large pin here that lines it up. We can cheat and look back here and make sure the pins are going in. Reinstall your screws. We'll fast-forward here as we reinstall the four screws: one in the door pull cup, one behind the door handle, and then the two at the bottom. Make sure you put the little trim pieces back in the one for the pull cup and the one for the door handle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an inside door handle on the front door of this 2004 Dodge Stratus, same as any '01 to '06. The door handle on this vehicle is in fine shape, so we just take it off and put it back on just to show you. Tools you'll need are a flat blade screwdriver, Phillips screwdriver, door panel clip tool or a putty knife to pry out on the door panel, as well as a T20 Torx driver.
Use a small flat blade screwdriver, and down in the pull cup here pry up a little trapdoor, there's a little Phillips screw in there. Then, in behind your door handle, there's another Phillips screw in there. Then there are three Phillips screws: one there, there, and then one on the back edge here. I'm just going to fast-forward as I use a Phillips screwdriver and remove six screws in all. This triangle here you can just pull out and off. Now all you need is a putty knife. You want to get it down in behind the door panel here, slide it down, and pull it out. Then start to pull the pins and then the door panel comes up. Right here is your lock harness. There's a little button, press on that to disconnect it. Then, on your latch rod, there's a clip. Reach in behind with my finger, pull that clip off, and then the rod comes up and off. Then, lastly, down here is your window harness. There's a button right in the middle. You really got to push that button, work the harness out, and then your door panel is off.
Once your door panel is off, you want to check these aqua pins here, because there could be pins stuck inside them. Use a pair of needle nose pliers, pull the pins out and then reinstall them on the inside of your door panel. With your door panel off, here's the back of your door handle. A lot of times what will happen is this lever here will break or the shaft that holds everything together will break. There's two T20 Torx screws right here. Okay and fast-forward here as we remove those two T20 Torx screws. Okay, now your handle comes right out.
Okay, so here my handle is in fine shape, so I'm just going to show you this. You would want to remove your switch here. Use a screwdriver and kind of pry out and pull the switch and pull it out. Obviously, then, you'd put the switch back in your new handle. The three tabs are on the bottom, so just put it right back in. Start my two screws. Fast-forward here again as we start those two screws and tighten them up with a T20 Torx driver. Okay, pull this clip up like that.
To put your door panel back on, first reconnect your power window switch. Make sure it clicks. Bring it close and reconnect your power door locks. Take this rod, put into the hole, slip the clip right around, and flip it on. Make sure your lock goes through. There is a larger locating tab, it goes into a big hole, once you've got that, make sure your pins go in. Cheat back, make sure all the pins go in correctly. Now it's just a matter of replacing all the Phillips screws. We'll speed up as we replace all those screws and those one down in the door cup, behind the door panel. There's also three at the bottom and then one at the back.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
BHS11523
877-844-3393
Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET
Specify your vehicle's year, make and model to guarantee fit.
This part doesn't fit a . Select from parts that fit.
Before proceeding,
select your Vehicle, to verify this Part will fit.
If your vehicle isn't listed, search Door Handle - Interior
This part will only fit a 2005 Dodge Stratus with these options.