2009 Chrysler Town & Country Touring North America Built Models Driver Side Headlight Assembly Eagle Eyes CS283-B001L

Mounting was easy and they fit right in. Beam pattern is Decent with some small overlaps making some bright spots.. These look really good on the car but there are a couple issues that really show the low cost! Buyer Beware: 1. One of the photos shows the ballast wiring coming out the bottom of the housing. Good luck finding High voltage wires that will work as they have omitted the bracket that holds the ballast wiring in place. The instructions just don't work with the cable that goes to the bulb from the ballast. Most of the cables from the ballast to the wiring has a bend and if you don't have the bracket in place you can't fit the ballast back on. We transplanted our OEM wiring to this housing including the bracket. 2. The brackets that hold the D1S bulb in place are garbage. They made it so you don't use the D1S spacer and have tension wires around the backside of the starter on the bulbs. This bulge makes it very hard to replace a bulb in the future and makes it near impossibl