ACSHF00002-Chevrolet GMC Cadillac Front Wheel Bearing & Hub Assembly

Replaces

Chevrolet GMC Cadillac Front Wheel Bearing & Hub Assembly ACDelco FW346

ACSHF00002

This part replaces:

  • Hollander 538-00128
  • OE # 25918329
  • OE # 10393171
FREE SAME DAY SHIPPING
Save 38%
List: $440.95 Save: $169.00
Only 3 left in stock
Part ACSHF00002
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

AC DELCO
Brand #: FW346

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:05)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the hub nut cover with a hammer and chisel
    • Remove the hub nut with a 36mm socket and a breaker bar or a ratchet with pipe for leverage
    • Make sure the axle moves freely
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (2:05)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Caliper and Pads (2:29)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Brake Caliper Bracket and Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the brake rotor
    • Pull the rotor off by hand
    • If the rotor will not come off by hand, apply penetrating oil to the studs
    • Tighten M10 bolts into the rotor to press it off
  5. step : Removing the Hub (4:35)
    • Apply penetrating oil to the hub bolts
    • Remove two of the three 15mm bolts from the hub mount
    • Loosen the third 15mm bolt
    • Use a hammer to loosen up the hub
    • Disconnect the ABS sensor wiring harness near the chassis
    • Remove the third 13mm bolt
    • Pull off the hub and backing plate
    • Disconnect the ABS sensor wiring harness at the hub
  6. step : Installing the New Hub (6:44)
    • Clean the steering knuckle with a wire brush
    • Apply white grease to the hub flange
    • Push the hub through the backing plate and on to the steering knuckle
    • Start the three 15mm bolts by hand
    • Tighten the 15mm bolts to 133 foot-pounds of torque
    • Route and reconnect the abs sensor wire at both ends
  7. step : Reinstalling the Brake Caliper Bracket and Rotor (8:25)
    • Slide the rotor into place
    • Thread one lug nut to hold the rotor in place
    • Put the brake caliper bracket into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 100 foot-pounds
  8. step : Reinstalling the Brake Caliper and Pads (9:06)
    • Apply white grease to the brake pads
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds
    • Remove the placeholder lug nut
  9. step : Reattaching the Wheel (11:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Put on the hub nut
    • Tighten the hub nut to 156 foot-pounds
    • Tighten the lug nuts to between 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap, inserting the tongue into the wheel groove
  10. step : Testing the Brakes (11:36)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 36mm Socket

  • Star Drivers & Sockets

  • T30 Driver

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this a pair or for one?
Tyler W May 25, 2020
Hello Tyler. This listing is just for one hub assembly. If you need a pair then please check out part number ACSHS00002!
Tim K May 26, 2020

Fits the following Makes:

Year Make Model Description
2007-2014Cadillac Escalade Cadillac Escalade 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007-2014Cadillac Escalade ESV Cadillac Escalade ESV 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007-2013Cadillac Escalade EXT Cadillac Escalade EXT 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007-2013Chevrolet Avalanche Chevrolet Avalanche 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 1500 Chevrolet Silverado 1500 with New Body Style 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2008-2013Chevrolet Silverado 1500 Chevrolet Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2009-2013Chevrolet Silverado 1500 Chevrolet Silverado 1500 Rear Wheel Drive with RPO Code J92 (4 Wheel Disc Brakes & ABS) Front Wheel Bearing & Hub Assembly
2007-2014Chevrolet Suburban 1500 Chevrolet Suburban 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007-2014Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2010-2014Chevrolet Tahoe Chevrolet Tahoe Rear Wheel Drive with RPO Code PPV (Police Package Vehicle) Front Wheel Bearing & Hub Assembly
2007GMC Sierra 1500 GMC Sierra 1500 with New Body Style 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2008-2013GMC Sierra 1500 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2009-2013GMC Sierra 1500 GMC Sierra 1500 Rear Wheel Drive with RPO Code J92 (4 Wheel Disc Brakes & ABS) Front Wheel Bearing & Hub Assembly
2007-2014GMC Yukon GMC Yukon 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007-2014GMC Yukon XL 1500 GMC Yukon XL 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
DIY Solutions HUB01062

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
AC DELCO
Brand #: FW346
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Cadillac Front Wheel Bearing & Hub Assembly ACDelco FW346-ACSHF00002 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.