WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light 1995-2000 Chevy Tahoe
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
1. Removing the Taillight
Remove the taillight caps with a flat blade screwdriver
Remove the two Phillips screws from the taillight bracket
Pull the taillight out
Disconnect the taillight wiring harness
2. Servicing the Bulbs
Remove the two Phillips screws holding the circuit board
Pull the bulb out of the light
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the New Taillight
Insert the circuit board onto the taillight
Insert the two Phillips screws onto the circuit board
Reconnect the wiring harness to the taillight
Line up the bolt holes on the taillight bracket to the bolt holes on the vehicle
Replace the two Phillips screws into the taillight bracket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service as well as replace the entire taillight assembly on this 1996 Chevy Tahoe. We show you on the driver side, but the passenger side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com, a flat blade screwdriver, and a Phillips screwdriver.
Using your flat blade screwdriver, you want to pry out this cap and this cap right here. Now, you want to remove this Phillips screw and this Phillips screw. We'll just fast-forward as Don does that. Now, pull the taillight straight out and then pull back on the tab on this harness and pull it free.
Now, if you want to just service the bulbs, you just remove these two Phillips screws holding on this panel. Now, you just pull the bulb out and then push your new one in. The other two are the exact same way. If your circuit board ever breaks, we do offer exact replacements at 1AAuto.com.
To replace the bulbs, you can just put that circuit board back into place and replace those two Phillips screws. In the back is the original light; in the middle is the new light from 1AAuto. You can see in exact replacement. We also offer kind of a performance style and these styles do change from time to time. This is example of what we were offering when this video is done.
To re-install, plug it back in, put the light in place, and line up the holes, and re-install those two screws.
Replace those two caps. To give you a better idea of how they look, on the left is the new one and on the right is the old one. You can see they're identical. These just look a little bit newer. Then for the performance taillight and just a close up of it. And you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
GM080-SASYL
In Stock
Product Reviews
Loading reviews
4.83/ 5.012
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
2
0
0
0
Superior Replacement Part
Jason
August 4, 2017
Superior replacement part for my 91 Chevy K1500. The gasket and overall quality is far superior to the original party that I took out. Super easy to install, with only a screwdriver needed for tools.
Great
C
December 1, 2017
I had no problems and I got my order in a promptly Manner and it was great
The No. 1 Source For Your Auto Parts
M
December 11, 2017
I have used 1A Auto Parts on several occasions and not once have I been disappointed. The parts fit as they should and arrive in a timely manner.
Customer service is outstanding. Ordering throught the website is very easy. Give it a try. If you're not happy with the part give customer service an opportunity to try and remedy the problem.
1ALTL00063-Tail Light Circuit Board Driver Side
Jim
February 14, 2018
Very pleased with this tail light circuit board. Fit was perfect for my 1999 K1500 Suburban, and included the lamps...great price.
so glad we found this website!
C
August 17, 2018
The item we ordered worked perfectly. arrived quickly and even had the bulbs installed and ready to go.
Tail light Circuit Board
R
September 15, 2018
I would highly recommend this product. It was so easy to installed, I was able to install it myself. This only negative and this isn'[t related to the product but the shipping. I ordered two circuit board and they were shipped to me in two different orders. This would be fine if only I was alerted to this form of shipping. I initially thought my order was not taken properly.
Solved my tail light problem
Kevin
November 29, 2018
Easy install direct fit no problems. Thanks A1 Auto!
Perfect fit.
M
March 21, 2019
Fit was great. Shipped quickly and bulbs were included. Nice purchase.
Satisfied
E
September 7, 2020
Will Definetly order again. Works perfectly.
Good so far
M
October 29, 2020
Came identical to the original, quick to install. Been working for a few weeks now with no issue. The fact that it comes loaded with bulbs makes it very convenient too.
Works great
Kent
March 18, 2022
Arrived quickly. Fit perfectly. Works perfect.
!
James
December 11, 2022
Good fit
Customer Q&A
Does this part come with a gasket ?January 14, 2019
E D
10
This part does not come with a gasket, no.
January 14, 2019
Peter L
10
Yes, you can see it in the photo. I installed these to replace the lights on my '91 Chevy Silverado 2-3 years ago--they're still working great.
January 15, 2019
Jason H
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.