Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Battery Tray 2000-06 Chevy Suburban
How to Replace Battery Tray 2000-2006 Chevrolet Tahoe
Created on:
Tools used
13mm Socket
8mm Wrench
10mm Socket
Ratchet
1. Removing the Battery Tray
Remove the 10mm bolts from the brace
Disconnect the negative battery cable with an 8mm wrench
Disconnect the positive battery cable with an 8mm wrench
Remove the 13mm battery mounting bolt
Remove the battery
Remove the seven 10mm bolts connected to the battery tray
Pull out the battery tray
2. Reattaching the Battery Tray
Put the battery tray into place
Tighten the seven 10mm bolts to the battery tray
Put the battery on the tray
Tighten the 13mm battery mounting bolt
Reconnect the positive battery cable
Reconnect the negative battery cable
Tighten the 10mm bolts to the brace
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the battery tray on this 2002 Chevy Suburban. The items you'll need for this include a 10mm and 13mm socket and ratchet, and an 8mm wrench.
Start off by removing this 10mm bolt. Loosen this 10mm bolt right here. Just move this brace out of the way. Using your 8mm wrench, just loosen up both of these connections. You start with the negative, loosen it, and then pull that off. Then remove the positive cable.
Now you want to remove this 13mm bolt. Pull this battery hold-down up, and out. We'll just fast-forward as Don removes that bolt. The hold-down will pull right up, and out. Lift your battery out. Remove the seven 10mm bolts in the battery tray. We'll fast-forward as Don does this. Lift the battery tray up, and out.
Put your new battery tray into place, and then replace those seven 10mm bolts. We'll fast-forward as Don replaces and tightens those up. Lower your battery back into place. Put your battery hold-down back into place. Just tighten that back up. Reconnect your positive battery cable and tighten it up. Reconnect your negative battery cable and tighten that up. Put that brace back in place, and then replace that 10mm bolt and tighten it up. We'll just fast-forward as Don tightens up this 10mm bolt and the 10mm bolt at the other end of the brace. Once that's done you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
14mm Wrench
13mm Socket
Gloves
Socket Extensions
8mm Wrench
10mm Socket
Ratchet
Safety Glasses
BDS00208
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
GREAT
JOHN
February 26, 2021
What can one say about battery tray except it does what its made for to hold the battery tightly in place. The video made the job so easy, it took all of fifteen minutes.
Carey
July 15, 2021
The hardest part was getting the old one out with rusted, rounded off bolts.
Great
Romy
September 17, 2021
Great and perfect. Nomore rust stain on my concrete floor everytime i wash my truck because of the corrosion coming from the old corroded battery tray.
Customer Q&A
Does this come with new hardware?January 22, 2023
Derek C
10
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
January 22, 2023
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.