Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blend door actuator on this 2002 Chevy Suburban. You'll need a new blend door actuator from 1AAuto.com, a 7mm socket and ratchet, and a 7/32 socket.
Start off by removing the 7mm bolts from this panel underneath your glove box, this one being right there, and we'll fast-forward as Don removes these 3 bolts. Pull down the panel and remove it. Your blend door actuator is right here. Just push the tab on the harness, pull it free, and then remove that 7/32 bolt and the other one on the other side. We'll fast-forward as Don does this. Now pull the actuator down and it will pull free.
On the left is the old blend door actuator; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Take the blend door actuator, push it back up into place, and replace those two 7/32 bolts. We'll just fast-forward as Don replaces those and tightens them up. Connect the harness, push this panel back up into place, replace those three 7mm bolts, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
BDA30811
