Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
Tools used
Tools used
Tools used
Tools used
Okay, to start this job, let's just compare it, make sure we're dealing with the correct part. This looks great. The next thing we're gonna wanna do is remove our tail lamp. To do that, use a Phillips head screwdriver and remove both those mounting bolts. Grab the lens. Carefully pull it away. Grab some penetrant. Go ahead and spray this down.
Let's use our 15-millimeter wrench right back here to hold this nut and our T40 Torx bit to take this off. There we go. Go ahead and grab that. Slide it in. Take your nut. We're gonna go ahead and put this together but we're gonna leave it nice and loose. The reason for that is because I want it to be able to move around. The next thing we're gonna wanna do is close the tailgate. When the latch comes up, it's gonna bring this to exactly where it lines up perfectly, and then we'll just go ahead and try to snug this at that point so we know exactly where it needs to go. Close this. All right. So, that's latched in. That seems like its exactly where it needs to be. And snug this. Go ahead and snug it up.
Put our tail lamp back in here. Lined up. Start and bolt the screws. After you've done that, go ahead and snug them right up. Okay, let's test it. Perfect.
Tools used
Tools used
