1ABFS02338-Chevrolet Buick Rear Semi-Metallic Brake Kit

Replaces

2006 Chevrolet Monte Carlo Rear Semi-Metallic Brake Kit

1ABFS02338-1027862-2006
Guaranteed to fit: 2006 Chevrolet Monte Carlo

Fit Details

  • Front or Rear Location: Rear

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Venting Type: Solid
  • Rear Brake Rotor Diameter: 10.94 in. (278mm)
  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Wheel Lug Count: 5 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number 118 AXMD698
  • Reference Number 55125
  • Hollander 533-02339
  • OE # 88965647
  • OE # 18060232
  • OE # 25956847
FREE SAME DAY SHIPPING
Part 1ABFS02338
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11607

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Semi-Metallic
  • Rear Brake Rotor Diameter:   10.94 in. (278mm)
  • Kit Includes:
      (1) Rear Semi-Metallic Brake Pad Set
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:48)
    • Remove the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:13)
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:30)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Brake Rotor (2:33)
    • Remove the two 13mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx bolt from the rotor
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  5. step : Preparing the New Brake Pads and Rotors (3:46)
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
    • Clean the rotor with brake parts cleaner
  6. step : Installing the New Brake Rotor (4:37)
    • Slide the rotor on
    • Insert the T30 bolt into the rotor
    • Put the bracket back into place
    • Start the two 13mm bolts by hand
    • Tighten the 13mm bolts to 75 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:39)
    • Put the brake pad slides into the caliper bracket
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the caliper pistons back
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 60-65 foot-pounds
  8. step : Reattaching the Wheel (6:41)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  9. step : Testing the Brakes (7:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • White Grease

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 14mm Socket

  • Star Drivers & Sockets

  • T30 Driver

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2008-2009Buick LaCrosse Buick LaCrosse V8 5.3L with RPO Code FE4 (Special Ride & Handling Suspension) Rear Semi-Metallic Brake Kit
2006-2009Chevrolet Impala Chevrolet Impala Rear Semi-Metallic Brake Kit
2010Chevrolet Impala Chevrolet Impala without Integrated Parking Brake Rear Semi-Metallic Brake Kit
2006-2007Chevrolet Monte Carlo Chevrolet Monte Carlo Rear Semi-Metallic Brake Kit

Part Interchange

Brand Label Part Number
Aimco 55125
Bendix PRT5628
DIY Solutions BFS00775
DuraGo BR55125
Raybestos EHT698H
Raybestos Brakes EHT698H
Raybestos Brakes 580401
Wagner BD126348

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11607
Product Reviews
4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Complete kit prefect fit
Ordered for 09 Impala they arrived promptly and fit perfectly.
June 18, 2018
I feel it could be a better product for older cars
December 25, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company. See all trademarks.

Chevrolet Buick Rear Semi-Metallic Brake Kit-1ABFS02338 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2006 Chevrolet Monte Carlo with these options.