Replaces

Cadillac CTS CTS-V Steering & Suspension Kit - 1ASFK04154

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:31)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (2:21)
    • Remove the 15mm nut from the top bar link with a deep socket
    • Secure the opposite end with vise grips
    • Repeat the process for the other side
    • Remove the link from the sway bar
  3. step : Installing the Sway Bar Link (4:53)
    • Line up the sway bar link
    • Reinstall the nut on both ends by hand
    • Hold the hex with a 14mm stubby wrench
    • Tighten the 15mm nut
    • Repeat the process for the top side
    • Torque the nuts to 37 foot-pounds
  4. step : Reattaching the Wheel (5:48)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2007 Cadillac CTS 8 Piece Set Steering & Suspension Kit
  • 2004-2007 Cadillac CTS-V 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K80564
  • OE # 25740375, 4D0505465D, MB892981
  • Moog EV800332
  • Moog K80635
  • Moog ES3586
  • Moog ES3585
Part #: 1ASFK04154



How-to Video:

(07:44 min)