Replaces

2005-15 Toyota Tacoma Mirror Pair Trail Ridge TR00254 - 1AMRP01137

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Mirror Signal Type:   Smoked Lens Turn Signal
  • Mirror Operation:   Power
  • Mirror Type:   Towing
  • Mirror Extension Type:   Flip-Up
  • Quantity:   Pair
  • Mirror Color / Finish:   Textured Black
  • Mirror Folding Type:   Manual-Folding
  • Mirror Heating Type:   Heated

Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Power operation
  • Heated*
  • Turn Signal with Smoked Lens
  • Folding - Manual operation
  • Flip-Up Style
    • Not offered from the factory
  • Black Textured Finish
  • Built to strict quality control standards
  • Direct fit replacements
  • Detailed installation instructions included

*Additional parts will be needed to complete the heater function.  For a clean OE appearing install, we recommend the following:

  • Heater mirror switch from an 01-03 Toyota Highlander (OE part number 84871-48030)
    • this switch will fit in one of the existing switch blanks on the dash.  If your vehicle does not have any switch blanks, other modifications may be needed
  • Heater mirror switch plug from an 01-03 Toyota Highlander (OE part number 90980-10789)
  • 4 pin 30 amp 12 volt relay (Dorman part number 84601)
  • Relay plug (Dorman part number 85170)
  • ATM fuse tap and 10 amp ATM fuse
  • Various lengths and colors of 14-16 gauge & 20-22 gauge wire

Trusted Quality:

  • Trail Ridge Truck Accessories are developed and built with a promise to provide high quality, durable parts for your truck and back them with the best warranty in the automotive industry. They are manufactured from the highest quality materials and are constructed to meet or exceed OEM standards. Every Trail Ridge truck part is rigorously tested to ensure superior fit, function, and durability. Quality, trusted value, and hassle-free installation are all backed by our 100% satisfaction guarantee.

 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Turn Signal & Heater Installation Manual

  1. step : Removing the Door Panel (0:35)
    • Pry the square doors open behind the pull handle and the door handle.
    • Push the center of the pin on the inside of the door panel and pry it free.
    • Pry off the triangular panel at the top of the door panel.
    • Remove the two Phillips screws.
    • Pry up the switch panel.
    • Disconnect the harness by pulling the locking collar back and pulling the harness free. Pull the collar back until it clicks.
    • Pry out around the edge of the door panel to release the clips.
    • Lift the door panel up and off.
  2. step : Removing the Side Mirror (2:46)
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (3:33)
    • Remove the shipping protectors
    • Run the harness through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm buts.
    • Reconnect the mirror harness.
  4. step : Replace the Door Panel (4:30)
    • Run the harness through the door panel.
    • Put the panel up on the window sill and line up the door panel.
    • Push in the clips around the door panel.
    • Replace the triangular trim panel.
    • Push the clip together to reset and replace it.
    • Replace the two Phillips screws.
    • Push the trap doors back into place.
    • Reconnect the switch panel and push the panel into place back first.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
We think they are great. Easy to install. Good visibility.
June 28, 2017
Awesome equipment
love these mirrors functional and better price and with the video installation was simple 15 min job.. love these
August 30, 2017
Awesome
I was skeptical about the quality, fitment, if the glass was going to shake, if they were going to look goofy on the truck. The quality was far superior than i was expecting, considering the price. They couldn’t have fit better, plugged right in, didn’t shake. I will say if you have never had tow mirrors before, it is a lot of new information that you see in your mirrors. Also they might look a bit goofy if you don’t have bigger tires or something to offset the size. I’m thinking of ordering a few sets to have on my shelf. Great product!
May 3, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Can this product be installed without installing the heater function? If so, must I remove anything from the product prior to installation or can I just tuck the heater wire out of the way without plugging it in to anything?
Melissa K October 15, 2016
Yes. The wiring plug in configuration is the same with or without the heater function on the vehicle. Its a simple plug and go wire function either way and works easily.
Travis W October 15, 2016
Yes it can. There is actually 2 plugs on them. 1 is for the factory plug for the turn signal and power adjust. The other is for the heat function. They come with wiring for the heat function but you would have to supply the other necessary electronics to make the heat function operate.
Cory C October 15, 2016
You are good to go without the heat hooked up. No modifications.
Randy R October 15, 2016
Yes. just leave the wires inside the door and dont hook them up
Matt P October 15, 2016
yes you can hide the wire, just hook up the electric control. you dont need the heater, i didnt hook it up
JOHN W October 15, 2016
My taco did not come with mirror defrost or blinkers im running them without either they work just fine.
Nicholas E October 15, 2016
Yes you can install the mirrors without the heater function.Just leave it unplugged .
Gary T October 16, 2016
YOU CAN INSTALL IT AND JUST LEAVE THE HEATERS DISCONNECTED. NO PROBLEM.
Alan M October 17, 2016
What covers will fit these?
Michael R September 8, 2017
The covers in most cases will need to be from the same mirror manufacturer to ensure a proper fitment. These include a black textured cap already installed to reduce the labor required.
Alex P September 8, 2017
Year Make Model Description
2005-2015Toyota Tacoma Toyota Tacoma Power Heated Smoked Lens Turn Signal Manual-Folding Textured Black Flip-Up Towing Mirror Pair
Part #: 1AMRP01137


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Trail Ridge
Brand #: TR00254

How-to Video:

(06:28 min)