Replaces

2003-07 Honda Accord Front Passenger Side Strut & Spring Assembly Monroe Quick-Strut 172123R - MNSTS00534

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:27)
    • Partially raise the vehicle with the wheel still contacting the ground
    • Loosen the 19 mm lug nuts
    • Raise and support the vehicle on jack stands
    • Remove the lug nuts
    • Replace one lug nut loosely
    • Hammer the tire from the back side if the wheel is stuck
    • Remove the last lug nut and the wheel
  2. step : Removing the Strut (0:55)
    • Remove the 14 mm lower strut bolt
    • Remove the 17 mm nut from the 17 mm wishbone bolt and remove the bolt
    • Remove the wishbone from the bottom of the strut
    • Remove the three 14 mm and two 12 mm nuts from the top strut mount
    • Remove the strut from the top mount
    • Remove the upper control arm cotter pin
    • Remove the 17 mm upper control arm castle nut
    • Hit the upper knuckle to release the ball joint stud
    • Remove the 10 mm nut securing the ABS wire bracket to the upper control arm
    • Move the knuckle forward to remove the strut
  3. step : Installing the Strut (5:25)
    • Insert the strut top mounting studs into position
    • Install the three 14 mm top mount nuts and the two 12 mm nuts
    • Torque the three 14 mm nuts to 37 ft-lb
    • Torque the two 12 mm nuts to 16 ft-lb
    • Insert the lower strut into the wishbone
    • Install the 14 mm lower strut bolt
    • Torque the 14 mm lower strut bolt to 32 ft-lb
    • Align the wishbone with the lower control arm
    • Install the 17 mm bolt and tighten the 17 mm nut onto it
    • Torque the 17 mm wishbone bolt to 47 ft-lb
    • Insert the upper control arm ball joint into the knuckle
    • Install the ball joint castle nut
    • Torque the ball joint castle nut to 35 ft-lb
    • Continue tightening to align the castle nut with the cotter pin hole in the stud
    • Install the new cotter pin
    • Install the ABS wire bracket onto the upper control arm
    • Install the 10mm nut securing the bracket
  4. step : Installing the Wheel (11:53)
    • Slide the wheel onto the lug nuts
    • Replace the lug nuts and tighten them in a star pattern
    • Lower the vehicle with the wheel lightly touching the ground
    • Torque the lug nuts in a star pattern to 80 ft-lbs
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 17mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2007Honda Accord Honda Accord Front Passenger Side Strut & Spring Assembly Monroe Quick-Strut 172123R
Only 1 left in stock
Part MNSTS00534
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Monroe Quick-Strut
Brand #: 172123R