Part Details

  • Mirror Operation: Manual
  • Mirror Color / Finish: Textured Black

This replacement Ranger Manual Mirror is just what you need to get your Ford Ranger in good looking form again!

This new, aftermarket Mirror features the following specifications:

  • Driver Side
  • Manual mirror
  • Non-Heated mirror
  • Injection molded black plastic housing
  • Sail mount design - Mounts in the corner of the door
  • Direct replacement mirror
  • Built to strict quality control standards

We have noticed that there are many inferior quality car mirrors on the market. We have researched other auto mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket rear view and side mirrors available. So don't be fooled by cheaper made imitation auto mirrors. Go with superior quality!

This Ford Ranger Manual Mirror makes a great replacement and has substantial cost savings over a dealer auto mirror.

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:10)
    • Disconnect the negative battery cable.
    • Remove the two Phillips screws behind the door pull.
    • Pull the panel out.
    • Disconnect the harnesses.
    • Remove the Phillips screws and disconnect the power window switch.
    • Remove the two Phillips screws in the door panel.
    • Lift the door panel up and off.
  2. step : Removing the Side Mirror (4:33)
    • Carefully peel off the water shield (If the truck has power mirrors).
    • Remove the 6mm bolts that secure the speaker.
    • Remove the speaker.
    • Disconnect the mirror harness.
    • Remove the three 11mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (6:08)
    • Feed the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 11mm nuts.
    • Reconnect the mirror harness.
    • Replace the speaker and the 6mm bolts that secure it.
    • Replace the water shield.
  4. step : Replacing the Door Panel (7:36)
    • Push the door panel down into place.
    • Replace the two Phillips screws in the door panel.
    • Reconnect the power window switch to the switch panel and replace the screws.
    • Reconnect the other harnesses to the switch panel.
    • Line up the panel and push it into place.
    • Replace the two Phillips screws under the door pull.
    • Reconnect the negative battery cable.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 6mm Socket
  • 11mm Socket

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1993-1997Ford Ranger Ford Ranger Manual Textured Black Mirror Driver Side

This part replaces:

  • Partslink FO1320156
  • Hollander 128-384L
  • Dorman 955-010
  • TYC 2500332
  • OE # F87Z 17683 SAB
Part #: 1AMRE00214


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:45 min)