Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 2014-19 Toyota Tundra
How to Replace Taillights 2007 - Present Toyota Tundra
Created on:
Tools used
Socket Extensions
T30 Driver
Ratchet
1. Removing the Tail Light
Remove the two T30 Torx bolts from the tail light
Pull the tail light straight out
Pull the harnesses out of the clips
Disconnect the wiring harnesses
2. Installing the Tail Light
Connect the wiring harnesses
Press the tail light into place
Tighten the two T30 Torx bolts
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the tail gate. To remove the tail lamp assembly, there's a T30 Torx bolt here and a T30 Torx bolt here. Using a torn bit and a ratchet, remove them. Let's pull it straight out. Pulling it off of these two pins here. To remove the tail lamp assembly. Push the harness out of this connector here. Just unplug these connectors, pushing in the locks to unlock them. Do the same for all three. Take the assembly off.
Here's the original tail light assembly pulled from our vehicle. Here's our brand new one from 1aauto.com. It is an exact match from the original. It will fit great and work great in your vehicle.
Reinstall it. Plug all our harnesses back on. They'll click when they lock into place. Push this back in. And these two tabs is going to go on the lower part. One will go on the upper one. Get them lined up. Push them in. Reinstall our bolts. Tighten them up. This procedure will be identical for the other side. It gets tight. Just stop.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Socket Driver
Pocket Screwdriver
TY1242-B000L
In Stock
Product Reviews
Loading reviews
4.25/ 5.08
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
1
0
1
Tail light was cracked on the inside
F
December 15, 2017
I got this and the inside by where the middle bulb is put in is a big crack. Unfortunately I do not have the time or the money to sit and ship back and wait for a replacement. So I had to do a little repair work myself. Also it doesnt fit back on the truck as well as the original. Not very happy!
Needed a tail light in a hurry
Jeffrey
April 18, 2019
This was really easy to order and was delivered quickly. I would deffinatrly use this company for all my needed car or truck parts.
TAILLIGHT ASSEMBLY
Robert
August 30, 2019
The product arrived on time which was awesome! Great price compared to the stealerships lol. The taillight was a lot better than I expected and nothing was broken. It was a direct fit as shown on how to video. I would DEFINITELY recommend this product to everyone and not only that I would recommend the 1A Auto website for all your car/truck needs! Thanks 1A Auto awesome doing business with you all!
2015 Driver Side Tundra Rear Tail Light
K
December 23, 2019
The tail light was a perfect match and fit for the original tail light. This was an after market tail light that was made for 1A Auto. The dollar savings was significant! More than 50% less than what my local Toyota Dealership wanted to charge me.
Thanks,
Kirk
Clips to hold wires were broken.
J
January 28, 2020
Ther were clips to hold the wires and the were all broken.
Perfect match
D
February 11, 2020
This replacement light is a perfect match to stock. Fits in with no problem and came with bulbs also. Definitely recommend to anyone looking for a replacement.
Toyota taillight
Q
September 29, 2020
Price for product was much more reasonable and product sent out for delivery right away.
Great service!
S
December 18, 2020
Perfect match and even included new bulbs!! Very impressed with this company.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.