Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Once you have your vehicle safely raised and supported, you're going to remove all 5 lug nuts using a 21-millimeter. Carefully remove the wheel. Set it aside. One of the first things we have to do is break free this jam nut. Make sure you have a good grip. There we are. That broke free.
The next thing we're going to do is remove this cotter pin. Use your 18-millimeter, remove this nut. Let's take that nut, just put it back on here a couple threads. Next we're going to take a hammer and we're going to hit right here, and this is going to fall down, then that's going to prevent it from falling and potentially hurting us. There we are. It's not off of there. Okay.
When you try to turn the outer tie rod end, if it doesn't come unscrewed from the inner tie rod end, you're gonna need to hold this with some locking pliers and then try to turn this at the same time. If you're having a hard time turning it you could use a boxed end of a wrench. It's a good idea to count the turns as it comes off, 23 is what I've got for mine. Yours might differ, but it's probably approximately that.
Grab your outer tie rod end, and screw it in as many times as it took you to take off the original. Bring it up around, pull this up. Start on that neoprene locking nut. Let's bottom this out with our 18-millimeter. Let's torque this to 59 foot pounds. Make sure you snug up your jam nut. Perfect. Let's get the wheel back up on here.
Start on all your lug nuts, and then bottom them out. Now we're going to bring this down and torque it to manufacturer's best. Now with the vehicles wheel touching the ground but most of the weight of the vehicle off of it, we're going to torque these in a star pattern to 100 foot pounds. Torqued.
