Window Regulator - 1AWRG00950

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power


  • LH (Driver Side) FRONT
  • Power operation
  • Includes power window motor already assembled to regulator

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove door panel. (1:10)
    • For more detailed instructions see our other videos.
  2. step : Unbolt Regulator (1:40)
    • Plug your power windows back in and tape it up.
    • Lift up the window and tape it up out of the way.
    • Drill out the rivets to remove the window regulator and un-mount the window motor.
    • Disconnect the wiring harness and feed it through.
    • Take out the motor first and then the regulator.
  3. step : Install the new regulator (7:15)
    • Replace the regulator and motor back into their original positions, regulator first.
    • Feed the harness back in place and plug it in.
    • Bolt the track back in.
    • Mount the regulator and your power window motor using 10 mm coarse threaded bolts with lock nuts.
  4. step : Test (10:05)
    • Test the to make sure the wiring is hooked up correctly.
    • Un-tape and attach the window.
    • Test again to make sure the window isn’t straining and everything works.
  5. step : Re-assemble the door panel (12:00)
    • Replace the water shield.
    • Reassemble the door panel.
    • For more detailed instructions refer to our other videos.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 12mm Socket
  • 18mm Socket

4.63/ 5.0
19 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Quality product
I found this window regulator to be of far better quality than the original part.
February 19, 2017
watch the video
If you watch the video and follow the steps it is not difficult to install. My first time to do this and the video made removal and installation an easy process.
February 24, 2017
fit like a glove.
Excellent fit. works like a champ. Only issue was I had to hunt up some nuts and bolts to replace the factory pop rivets.
March 7, 2017
Wrong product sent correct one ordered.
The wrong side was sent I needed driver side passenger side was sent. This caused a big hassle as now I have to wait for correct side
July 2, 2017
1AWRG00950-Window Regulator Front Driver Side
This part works just as the original does and I would recommend this product to any one who needs a replacement
July 4, 2017
Saved a lot
Thank you for the youtube. The only suggestions that delayed installation, were the plastic glides were stuck on the metal crimp at the end of each slide. Make sure thee plastic glide moves freely before putting in door frame. also, when mounting make sure door latch pushrod is on the correct side of the regulator. Knocking out the rivet centers was not so easy, the ones attached to the window, a bit scary. It was not that hard to do, I wish the regulator came with nuts and bolts or had an optional kit. Still awesome. 5 stars.
July 5, 2017
Excellent so far Sue loves the working window Jim P
July 6, 2017
The order shipped quickly and arrived sooner than it was scheduled. The product was correct for my needs and the video assist was helpful. It was as easy as I thought it would be for my ability. The overall experience was very good, it didnt break my funds, it came to me quickly and the installation was not too difficult. My son is grateful to be able to roll his driver window down, makes drive through ordering possible again, thanks so much! I will be doing busines with your company from here on out for my automotive needs! Once again, I thank you kindly!
August 27, 2017
Shipped quickly, arrived as promised, and product was as advertised.
September 26, 2017
For my 2000 Merc Mountaineer
Fast shipping!Received in 3 days ! not the 5 quoted...Awesome. Installed it in 2 hours or so , exact fit absolutely no adjustment required. Metal seems a bit thinner and motor a bit slimmer than the factory original but it works perfectly and is quiet and beds the window into the seal perfectly. Now if it lasts 17 years Ill REALLY be happy!
November 6, 2017
Customer Service
To date, I have not received the item. It might be delivered on Saturday. I am also expecting an order for two other items. 1. Radiator.and a Upper Intake Manifold (recently ordered.) Except for customer service. I think their response could be a little bit more tolerant. I do not want to go into detail, I was a bit disappointed.
December 8, 2017
Good Product - Great Videos
Thanks for helping us. The installation video covered all issues faced in installing the product and both of them worked perfectly when installed.
May 13, 2018
Thank you 1aAuto!
I am very pleased with my 1aAuto product and their customer service. I was a little worried about ordering a part online. But when my window regulator arrived within days of my order I was excited to find it was an exact fit. And with the 1aAuto installation video I had my power window working in no time. Thank you 1aAuto!
June 10, 2018
Great Price and how to video
I recommend using this online store. typed in what i needed. plenty of picture to verify it was correct. Even had a video on how to replace it. It was shipped and received in a reasonable amount of time. Will always look here first when needing car parts.
July 26, 2018
Window Actuator
The Actuator I received arrived in a damaged box because it wasnt packed very well. After examining the product It looked fine so I decided to install it. The video on you tube was excellent at describing the installation. My only complaint was the lack of hardware. It required a trip to hardware store and the choosing of proper hardware. Raise the price 5 bucks and include it. Window works great now.
July 28, 2018
2000 Ford Explorer Driverside Window Regulator
The window regulator arrived in perfect condition. Though not a crucial, it would have been nice if screws and bolts were included with regulator since drilling existing rivets require new hardware. Instructional video is a great feature to properly and safely install new regulator. Overall, the item worked perfectly with no cliches.
August 17, 2018
Buying the product on line was simple, straight forward & quick; delivery was timely as well...will use 1aauto for future purchases.
September 23, 2018
Bang for the buck!
Its easy to install, thanks to The video provided. Id still give 5 stars eventhough the nuts and bolts are not included. Wouldnt mind paying extra for having those instead of buying it separately. I used M8 x 20mm.
November 23, 2018
Worked great
Had no issues with part. Also enjoyed the how to videos.
January 4, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
what size bolts are needed to replace the rivets?
David B December 15, 2016
Normally you can use 1/4 20 hardware. We recommend you use nylock nuts. Do not use nuts with lock washers as these tend to still back off (unless you use locktite)
Brian F December 15, 2016
David, Here is what I used for the installation : METRIC HEX NUT 10.9 M8 ZINC MERTIC LOCK WASHER 10.9 M8 ZINC METRIC CAP SCREW 10.9 M8X20MM ZINC
Clark S December 15, 2016
About how long would you expect it to take for this replacement?
Dave R January 13, 2017
This replacement for the window regulator and motor should take between 1 to 2 hours. This includes removal of the door panel and proper access to lifting the window up and down to access the particular mounting bolts.
Alex P January 13, 2017
About 3-4 hours for a 1st timer, like me. Watched a youtube video on how. Took my time. Didnt want to break anything along the way. Might have to drill out a few rivets. Be careful of sharp edges of inner door panel openings.
Francis G January 14, 2017
about 2 hours
Mike J January 22, 2017
What level of difficulty would you say this repair is?
Dave R January 13, 2017
If you have at least average motorhead skills you should have no problems.There are some Youtube videos out there that I highly recommend before you begin. You will have to drill out a few big rivets and replace them with 1/4 X 20 machine screws. Drilling out the rivets is a bit of an art form. If you dont do it right the rivet will spin with the drill bit.Use a bit that will just fit into the recessed hole, then hold the bit at an angle while drilling. Done right, this will drill out the rivet without it spinning..
Dave G January 13, 2017
Expect to dedicate about 1/2 day. If you have never removed/replaced the door panel this will add time as you figure it out. Also, be sure and order a box of plastic door panel clips. Its not a good idea to reuse the old ones. Takes about 7 per door. Also, when you drill out those big rivets you will need to remove the part of the rivet that stays in the hole. Use a hammer and drift punch. Piece of cake for the rivets on the door structure but there are two rivets on the scissors mechanism. You will need to place some kind of bucking bar behind the arm. If you dont, there is too mach give and you will never push it out. This is a 2 person job. 1 to hold the bucking bar and punch, the other to smack the punch with a hammer.
Dave G January 13, 2017
On a scale of one to ten...I say a five. It was my first time changing out this part as well. The only thing that took awhile was waiting for the epoxy to cure (for window). Other than that not to bad.
Carlos T January 13, 2017
On average, this repair would be either a 2 or 3 out of 5 for level of difficulty. With the appropriate skills to identify bolts and how the mechanism operates you should have no issues in replacing this assembly and gathering your window operation back to full function.
Alex P January 13, 2017
I removed the old stuff, per the 1AAUTO YOU TUBE video, took me about 2 hrs. Very cold where i live so waiting for better weather to install. I estimate about 2 hrs. to install. It is not easy or very difficult, just time consuming, and a slow process. The YOU TUBE video has been very helpful.
William J January 20, 2017
Do you sell the bolts you need to complete this repair?
Dave R January 13, 2017
At this time we do not offer the mounting hardware to complete this repair, however you may purchase this hardware locally at a auto part store, or if the vehicle was factory equipped with bolts instead of rivets you may re use them.
Alex P January 13, 2017
Year Make Model Description
1991-2001Ford Explorer Ford Explorer Front Power Window Regulator with Motor Driver Side
2002-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Front Power Window Regulator with Motor Driver Side
1991-1994Mazda Navajo Mazda Navajo Front Power Window Regulator with Motor Driver Side
1997-2001Mercury Mountaineer Mercury Mountaineer Front Power Window Regulator with Motor Driver Side
Part #: 1AWRG00950

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:54 min)