Wheel Bearing Pair - 1ASHS00647

Warranty & Shipping
Product Reviews
Vehicle Fit

Part Details

  • Bearing Type:   Tapered Roller Bearing
  • Quantity:   Pair

This rear wheel hub bearing PAIR is a new aftermarket replacement part. It is just what you need to keep you vehicle in good running condition. It usually gets pressed onto the rear hub or axle shaft and then this assembly is installed into the rear knuckle. So if your rear wheel is making noises and it is determined that your rear wheel bearing is bad, this is the part for you!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Direct replacements
  • Attaches to either rear hub, rear CV axle, or rear knuckle assemblies
    • Buyer will need to have bearings pressed into assemblies

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.


Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do you sell the 4WD hub for 2005 Hyundai Tucson 2.7 4WD?
Mendy T February 28, 2016
Yes, please keep in mind that on this model application, the hubs are not assembled with the bearing. It does require pressing from the installer, recommended by a professional shop. The sku you may be interested in is : 1ASHS00301 or 1ASHS00321
Brian F February 29, 2016
Year Make Model Description
1999-2004Ford Mustang Ford Mustang Cobra Rear Wheel Bearing Pair
1989-1997Ford Thunderbird Ford Thunderbird Rear Wheel Bearing Pair
2001-2006Hyundai Santa Fe Hyundai Santa Fe Rear Wheel Bearing Pair
2005-2010Hyundai Tucson Hyundai Tucson 4 Wheel Drive Rear Wheel Bearing Pair
2005-2010Kia Sportage Kia Sportage Rear Wheel Bearing Pair
1993-1998Lincoln Mark VIII Lincoln Mark VIII Rear Wheel Bearing Pair
1989-1997Mercury Cougar Mercury Cougar Rear Wheel Bearing Pair
Part #: 1ASHS00647

Out of Stock