Replaces

Wheel Bearing & Hub Assembly TRQ BHA54001 - 1ASHF00192

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Triangular Flange
  • Fits 5 Lug Wheel
  • Replaces dealer part numbers: 15793213, 12413083, 12413084, 12413166, 12413274, 21995732, 22706967, 7467651, 7467687
  • New wheel studs already installed
  • Direct replacement
  • Fits models with ABS (Anti Lock Brakes)

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54001 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:54)
    • Use a 19mm socket to remove the plastic covers.
    • Remove the wheel cover.
    • Loosen the all the lug nuts while wheel is on the ground.
    • Once the car is jacked up remove all the lug nuts and pull the wheel free.
  2. step : Removing the Brakes (1:37)
    • Remove the two 14mm bolts on the back of the caliper
    • Place a screwdriver into the whole on the caliper and pry the pads out.
    • Remove the caliper and pads.
    • Remove the two 15mm bolts on the caliper bracket.
    • Pull the bracket free.
    • Pull rotor off.
    • Pull the tab on the ABS harness and pull the harness free.
  3. step : Removing the Rotor and Hub (4:01)
    • Hit the axel with a hammer. If it moves you are all set. If it doesn't you need an axel puller.
    • Remove the three screws on the back of the hub. Use a pipe for extra leverage.
    • Hammer the hub from side to side, up and down, until it loosens and can be pulled free.
    • Remove the hub and backing plate.
    • Use a wire brush to clean the bracket.
    • Spray with penetrating oil.
  4. step : Replacing the Hub Assembly (7:09)
    • Replace the backing plate.
    • Run the connecter up and through.
    • Line up the hub and push into place. Put the bolts through.
    • Reconnect the ABS.
    • Tighten the three hub bolts to 65ft/lbs.
    • Slide on the rotor. And replace one nut to secure it.
    • Replace the caliper bracket and bolts. Tighten to 85ft/lbs.
    • Put the brake pads into place.
    • Replace the caliper and the two bolts to secure it. Tighten to 35ft/lbs.
    • Remove the nut from the rotor.
  5. step : Replacing the Wheel (11:11)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a star pattern to 100ft/lbs.
    • Tighten the center lug nut to 159ft/lbs.
    • Replace the wheel cover.
    • Use a socket to replace the retainers.
    • Pump your brakes until they are firm.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 14mm Socket
  • 19mm Socket
  • 13mm Socket
  • 35mm Socket

4.79/ 5.0
14 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
3
0
0
0
Great product!! Now I have to order one for the front passenger side. Will order again...
November 16, 2012
awesome
I honestly was hesitant to buy from this site because Im so used to other auto parts stores. I really liked the how fast it was delivered, came the next day. The part itself was everything I needed. I will definitely be using these guys again.
September 15, 2015
As easy as shown in video
I have a 2012 Malibu and needed to replace right front wheel bearings. I ordered the two pack, because it was cheaper than single one at local auto parts store. Watched vide then removed and replace hub assembly. Took about 30 minutes. Very satisfied with my order.
November 7, 2015
Great company
Fit perfect, Free 2 day shipping. And the had a youtube video showing how to change the wheel bearing. I saved hundreds of $$$$$$$$$ doing it myself.
March 22, 2017
Great buy
Fit perfectly. Easy installation. Lot cheaper than from store. Great quality
June 20, 2017
Great hob
Did a great job. Even with the 4th right around the corner. I got my part installed by then and it rides smooth again. Thank you for getting the part I needed in a timely fashion to me.
July 13, 2017
GOOD QUALITY
FIT LIKE A FACTORY UNIT. LOOKS LIKE GOOD QUALITY PRODUCT.
July 17, 2017
Great Replacement
Ok so this is a great product for the most part, saved almost $400 just buying the part and me having my own wide variety of tools, I replaced the part myself! The dealership will charge over $500 and a small garage or mechanic will charge around $120 to install, long story short, If you have a nice set of Sockets, a couple different sized torque wrench’s you’ll be ok looking up a YouTube “How To� video
January 27, 2018
Happy with wheel bearing!
Just had this wheel bearing assembly installed. So far, seems great. Driving now very quiet. I am reviewing other products on your site to order. I was very impressed with how polite the customer service rep. Was and how quickly the unit shipped and the condition of part. Thank you for taking pride in your work. Dont see that very often in this day and age. I will recommend you to my friends. Lucy k.
February 19, 2018
So far so good.
Part fits well, seems like good quality. Time will tell. Going to be ordering more parts in the near future. Shipping was on time and packaging was good. Customer service has been exemplary thus far.
May 16, 2018
Hub Assembly
Excelent parts and prices, great shipping options. I got this hub assembly for my 2006 chevy malibu lt. It fit great just as the factory one, vehicle now runs great. Thanks 1a Auto!
August 12, 2018
Wheel bearing
Works great. Came with instructions and torque specs so I didn’t have to look it up. About half the price of the one I bought from local parts store and had to return due to bad sensor.
September 19, 2018
Hub and wheel bearing
Parts came on time perfect fix everything was good will use again and tell others about 1A Auto
September 29, 2018
great service
ordered this part in a hurry trying to get daughters car back on the road, called in the order and was surprised how fast it was shipped. I met the post office shipping dept. and picked it up there. Got the car to my mech. he then informed me that we didnt need the bearing I had ordered, go figure.. I called and explained this to 1A, the lady I talked to understood, and told me to send it back. I paid shipping back to 1A, but was NOT charged a restocking fee. great service,very easy to work with, just a great experience.
November 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this item fit my 2011 chevrolet malibu Ls 4 cylinder?
Kinston B May 3, 2018
Yes it will fit. Always remember to torque when part is installed.
Ernest G May 6, 2018
Yes, according to the information you supplied, the part youre looking at will be correct for your vehicle as long as you have ABS. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Tim K May 6, 2018
Exact fit. ABS function good. High value, low price. Excellent service.
J O October 14, 2018
Year Make Model Description
2008-2010Chevy Cobalt Chevy Cobalt SS Front Wheel Bearing & Hub Assembly for Models with 5 Lug Wheels Driver or Passenger Side TRQ
2008-2010Chevy HHR Chevy HHR SS Front Wheel Bearing & Hub Assembly for Models with Rear Disc Brakes Driver or Passenger Side TRQ
2004-2005Chevy Malibu Chevy Malibu New Body Style Front Wheel Bearing & Hub Assembly with ABS Brakes (4th Vin Digit Z) Driver or Passenger Side TRQ
2006-2007Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Driver or Passenger Side TRQ
2008-2012Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2005-2007Pontiac G6 Pontiac G6 Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Driver or Passenger Side TRQ
2008-2010Pontiac G6 Pontiac G6 Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2007-2009Saturn Aura Saturn Aura Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
Part #: 1ASHF00192


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA54001

How-to Video:

(12:29 min)