Replaces

Wheel Bearing & Hub Assembly TRQ BHA53916 - 1ASHF00041

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Tapered Roller Bearing

This replacement hub & bearing assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 5 Lug Wheel
  • Replaces dealer part numbers: YL5Z-1104-AA, 1F02-33-061, YL5Z1104AA, 1F0233061
  • New wheel studs installed
  • Includes ABS sensor
  • Direct replacement
  • Built to strict quality control standards
  • Fits models without Pulse Vacuum Hubs
  • Fits models with 4 Wheel ABS (Anti-Lock Brakes) only
  • Fits 4WD (Four Wheel Drive) Models only

Note: This hub only fits 4wd vehicles that have 4 wheel ABS and non pulse vacuum hubs. To tell the difference, the non pulse hub assy will have a smooth, inner surface (as pointed out in picture) where the axle shaft comes through.

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53916 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:51)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 32mm axle nut
    • Remove the wheel lock lug nut with a wheel lock key
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub (1:55)
    • Remove the two 15mm bolts holding the caliper bracket to the spindle
    • Secure the caliper bracket and assembly out of the way with a bungee cord
    • Remove the rotor
    • Disconnect the ABS sensor
    • Pry the ABS sensor connectors from the frame
    • Remove the 8mm bolt from the ABS harness
    • Remove the 32mm axle nut
    • Lightly tap the end of the axle with a hammer
    • Remove the three 15mm bolts on the backside of the spindle
    • Release the hub with a chisel and hammer and separate it from the spindle
  3. step : Installing the Hub (6:00)
    • Insert the hub and sensor into the spindle
    • Start the three 15mm bolts
    • Tighten the three 15mm bolts to the hub
    • Torque the 15mm bolt to 85 foot-pounds
    • Reinstall the 32mm axle nut by hand
    • Tighten the 8mm bolt to the ABS harness
    • Clip in the harness along the frame
    • Connect the ABS harness
    • Reinstall the rotor
    • Insert the caliper into place
    • Tighten the two 15mm bolts to the caliper
    • Torque the caliper bolts to 85 foot-pounds
  4. step : Reattaching the Wheel (8:11)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Tighten the 32mm axle nut
    • Torque the axle nut to 162 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 15mm Socket
  • 8mm Socket

  • Specialty Tools

  • Trim Tool Set

5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
perfect fit.no problems so far.very good price.
April 17, 2011
wheel hub assembly
Great item and quick shipping. The customer service was outstanding.
March 13, 2017
good
as described. Fits my 02 ford ranger. Would buy again
July 18, 2017
Great company
I buy almost all my part at 1a auto . It’s fast shipping and vary easy to order from them. Prices are vary good not allways the cheapest but you allways get the right part and the Costner service is great.
March 30, 2018
2001 ford ranger wheel hub
Exactly what was in description. Perfect fit! Bought about two weeks ago and it’s still doing amazing! Thanks!
May 9, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000Ford Ranger Ford Ranger 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes without Pulse Vacuum Hubs TRQ
2001-2002Ford Ranger Ford Ranger 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes TRQ
2001-2003Mazda B2300 Truck Mazda B2300 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes TRQ
1999-2000Mazda B2500 Truck Mazda B2500 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes without Pulse Vacuum Hubs TRQ
2001-2003Mazda B2500 Truck Mazda B2500 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes TRQ
1999-2000Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes without Pulse Vacuum Hubs TRQ
2001-2003Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes TRQ
1999-2000Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes without Pulse Vacuum Hubs TRQ
2001-2003Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes TRQ
Part #: 1ASHF00041


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53916

How-to Video:

(09:11 min)