Wheel Bearing & Hub Assembly Pair TRQ BHA86528 - 1ASHS01205



  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.


  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Quantity: Pair
  • Includes: (1) 30mm Axle Nut Socket

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Consulting Part 1 (0:05)
    • This is the second part of a two part video
    • Please consult part 1 for previous instructions
    • Perform the steps outlined in part 1
  2. step : Attaching the Axle (0:20)
    • Insert the axle shaft
    • Check that the axle is completely in its proper place
    • Insert the axle shaft into the hub
  3. step : Attaching the Strut (1:01)
    • Hold the brake line and ABS sensor wire out of the way
    • Manuever the strut into place with the steering knuckle
    • Make sure the strut bracket is lined up with the steering knuckle
    • Push the strut and steering knuckle together
    • Jack up the steering knuckle onto the strut
    • Insert the bolt
    • Attach the nut
    • Tighten the nut to 100 foot-pounds of torque
  4. step : Attaching the Sway Bar Link (2:25)
    • Insert the sway bar link
    • Move the brake line and ABS sensor wire into place
    • Clip the harness into place
    • Insert the bolt
    • Tighten the bolt
    • Tap the sway bar link into place with a hammer
    • Tighten the bolt with the 18mm wrench
  5. step : Connecting the Tie Rod End (3:39)
    • Insert the tie rod end
    • Attach the nut
    • Tighten the nut to 50 foot-pounds
    • Insert the cotter pin
    • Use the hammer to beat in the cotter pin
    • Bend the pin over
  6. step : Reinstalling the Brakes (4:21)
    • Please consult our brakes video for more detailed instructions
    • Tighten the larger bolts to 65 foot-pounds
    • Tighten the smaller bolts to 20 foot-pounds
  7. step : Attaching the Hub Hardware (4:42)
    • Attach the washer and hub bolt
    • If using impact tools, tighten the hub bolt
    • Otherwise this step will be performed with the car on the ground
    • Make sure the axle is going into the hub
  8. step : Reattaching the Wheel (5:16)
    • Slide the wheel in place
    • Attach the lug nuts
    • Tighten the lug nuts preliminarily in a star or crossing pattern
    • Lower the car to the ground
    • Tighten the center nut to 130 foot-pounds
    • Reattach the center cap, tapping it into place with the hammer
    • Tighten the lug nuts to between 80 and 100 foot pounds using the star pattern
  9. step : Road Testing the Vehicle (5:57)
    • Test the brakes at a low speed before road testing the vehicle

Tools needed for replacement:

    Air Powered Tools

  • Air Chisel
  • 1/2 Inch Air Impact Gun

  • General Tools

  • Hammer
  • Floor Jack
  • Jack Stands
  • Large Hammer

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 12mm Socket
  • 16mm Socket
  • 15mm Socket
  • 11mm Socket
  • 10mm Socket
  • 17mm Socket
  • 18mm Socket
  • 20mm Socket
  • 21mm Socket
  • 14mm Socket
  • 30mm Socket

  • Specialty Tools

  • Tie Rod Puller

  • Wrenches - Metric

  • 14mm Wrench
  • 13mm Wrench
  • 16mm Wrench
  • 11mm Wrench
  • 10mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 18mm Wrench
  • 12mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2007 Ford Taurus Front Wheel Bearing & Hub Assembly Pair with (1) 30mm Axle Nut Socket TRQ
  • 1995-2002 Lincoln Continental Front Wheel Bearing & Hub Assembly Pair with (1) 30mm Axle Nut Socket TRQ
  • 1996-2005 Mercury Sable Front Wheel Bearing & Hub Assembly Pair with (1) 30mm Axle Nut Socket TRQ

This part replaces:

  • TRQ BHA86528
Part #: 1ASHS01205

Brand #: BHA86528

How-to Video:

(06:26 min)