These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Include new axle nuts
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part number: 88957259
  • Include ABS sensors and plug wires
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards

These hub assemblies are great replacements and have good cost savings over dealer units.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:49)
    • Remove the hub cap
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
    • Turn the wheels for easier access to the calipers.
  2. step : Remove the brakes (1:06)
    • Remove the two 12mm bolts with a socket and breaker bar.
    • Use a C-Clamp to compress the caliper piston.
    • Pull the caliper off.
    • Remove the brake pads and check the life of them.
    • Observe the rotors; prepare a new rotor with brake cleaner if it is in need of replacement.
    • Use a 13mm socket and breaker bar to remove the caliper bracket bolts.
    • Remove the rotor.
  3. step : Remove the hub (3:42)
    • Disconnect the ABS sensor.
    • Remove the 35mm socket to remove the hub nut.
    • Put the wheel back on and lower the car to break the hub nut loose if necessary.
    • Use a 13mm socket and breaker bar to loosen the three nuts on the back side securing the hub.
    • Put an axle puller onto the hub and axle to break the axle free from the hub.
    • Sometimes a solid thwack with a hammer is enough to break the axle loose, taking care not to hit it hard enough to damage the CV joint.
    • Remove the 13mm nuts all the way and pull the hub off.
  4. step : install the new hub (6:48)
    • Thread the ABS harness through and line the axle up into the center of the hub.
    • Evenly tighten the three 13 mm bolts.
    • Connect the ABS sensor harness.
    • Torque the 13mm bolts to 65 ft lbs
    • Put the hub nut on, put the wheel on, lower the car, and torque it to 173 foot pounds.
    • Raise and secure the car, remove the wheel and continue.
  5. step : Put the brakes on (8:28)
    • Put your rotor on the hub.
    • Mount the caliper bracket and torque the 15 mm bolts to 65 ft lbs.
    • Install the brake pads.
    • Dab a little anti-seize grease onto the edges of the brake pads and insert them into the brackets
    • Install the caliper, and torque the caliper bolts to 15-18 ft lbs.
  6. step : put the wheel back on (11:00)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 90-100 ft-lbs in a star pattern.
    • Pump your brakes and do a couple test stops before driving your car anywhere.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Pitman Arm Puller

3.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
1
Don't go cheap!!!!
I made the mistake of purchasing the cheapest hubs, all failed, I have replaced them twice with 1A auto parts. All hubs have failed and i am now halting to replace them again. ABS system is not working. My fault for buy the cheaper ones. I don't know if i would by again when it comes to hubs, 4 pairs and all failed-again on the cheapest ones. Buy the best I guess.
February 14, 2017
Purchased
1 year ago
Noising Hubs replaced...01 Grand Am
Daughter drove her 01' Pontiac Grand Am home from college a couple weeks ago. I happened to hop in and took it on an errand. Couldn't believe how noisy and grindy (Yes, that's a made up word) the front end was. I did some internet researching and realized that the noise was coming from the wheel hub bearings. I've bought a lot of parts (I have five drivers with five high mileage cars) from R__K Auto. I decided that if I was going to replace one I might as well replace both front end wheel hubs. I compared prices between the other guys and 1A. Prices were similar. The reason I decided to try 1A is they showed the parts being in stock, and same day shipment with about a 3-5 day delivery. I ordered on a Tuesday and got the parts by Friday. I first watched the 1A "How To" video on how to replace front wheel hubs and then spent the weekend working on the car. One of the hubs was really STUCK. I literally had to take it out in pieces. I was able to give the car back to my daughter on Sunday. It ran and sounded great! It made a huge difference. Had I bought the parts from the other guys, I would have had to wait for over a week for sure. I'm sold! From now on, I'm a 1A Auto customer. By the way, I did call and talked to their customer service dept. I wanted to get an idea, after ordering on-line, when I should expect to get the parts. The US Postal Service web-site was not very customer friendly and took two days just to update their tracking site to "Shipped" on my package. Customer service was very good and assured me that the parts were shipped on Tuesday and that to expect them by Saturday. Like I said, I got them a day early. I had a great experience with 1A Auto and would highly recommend them to anyone that does the "DYI Weekend Warrior" stuff like I do. Love the videos guys! They're spot on. Keep up the good work. Bill T. -Kasson, MN
January 31, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:41 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

  • Specialty Tools

  • Pitman Arm Puller




Vehicle Fit

  • 2004-2005 Chevy Classic Front Wheel Bearing & Hub Assembly Pair with Axle Nut for Models with ABS Brakes
  • 1997-2003 Chevy Malibu Front Wheel Bearing & Hub Assembly Pair with Axle Nut for Models with ABS Brakes
  • 1999-2004 Olds Alero Front Wheel Bearing & Hub Assembly Pair with Axle Nut
  • 1997-1999 Olds Cutlass Front Wheel Bearing & Hub Assembly Pair with Axle Nut excluding Supreme Models
  • 1999-2005 Pontiac Grand Am Front Wheel Bearing & Hub Assembly Pair with Axle Nut
Only 1 left in stock
Part #: 1ASHS00750

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More