TKSHS00304-Chevrolet GMC Hummer Front Wheel Bearing & Hub Assembly Pair

Replaces

Chevrolet GMC Hummer Front Wheel Bearing & Hub Assembly Pair Timken TKSHS00304

TKSHS00304

Part Details

  • Quantity: Pair
FREE SAME DAY SHIPPING
Save 33%
List: $681.95 Save: $227.00
Part TKSHS00304

Out of Stock

Free GROUND SHIPPING

Close



Timken
Brand #: TKSHS00304
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   Pair

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Hex Wrenches

  • 5mm Hex Wrench

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Star Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench


Fits the following Makes:

Year Make Model Description
2002-2006Chevrolet Avalanche 2500 Chevrolet Avalanche 2500 Front Wheel Bearing & Hub Assembly Pair
2001-2003Chevrolet Silverado 1500 Chevrolet Silverado 1500 Crew Cab Front Wheel Bearing & Hub Assembly Pair
2004Chevrolet Silverado 1500 Chevrolet Silverado 1500 with 8 Lug Wheels Front Wheel Bearing & Hub Assembly Pair
2007Chevrolet Silverado 1500 Classic Chevrolet Silverado 1500 Classic with 8 Lug Wheels Front Wheel Bearing & Hub Assembly Pair
2001-2003Chevrolet Silverado 1500 HD Chevrolet Silverado 1500 HD Crew Cab Front Wheel Bearing & Hub Assembly Pair
2005-2006Chevrolet Silverado 1500 HD Chevrolet Silverado 1500 HD Front Wheel Bearing & Hub Assembly Pair
2007Chevrolet Silverado 1500 HD Classic Chevrolet Silverado 1500 HD Classic Front Wheel Bearing & Hub Assembly Pair
1999-2004Chevrolet Silverado 2500 Chevrolet Silverado 2500 Front Wheel Bearing & Hub Assembly Pair
2001-2006Chevrolet Silverado 2500 HD Chevrolet Silverado 2500 HD Front Wheel Bearing & Hub Assembly Pair
2007Chevrolet Silverado 2500 HD Classic Chevrolet Silverado 2500 HD Classic Front Wheel Bearing & Hub Assembly Pair
2004-2006Chevrolet Silverado 3500 Chevrolet Silverado 3500 with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair
2007Chevrolet Silverado 3500 Classic Chevrolet Silverado 3500 Classic with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair
2000-2006Chevrolet Suburban 2500 Chevrolet Suburban 2500 Front Wheel Bearing & Hub Assembly Pair
2001-2003GMC Sierra 1500 GMC Sierra 1500 Crew Cab Front Wheel Bearing & Hub Assembly Pair
2004GMC Sierra 1500 GMC Sierra 1500 with 8 Lug Wheels Front Wheel Bearing & Hub Assembly Pair
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD Crew Cab Front Wheel Bearing & Hub Assembly Pair
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Front Wheel Bearing & Hub Assembly Pair
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Front Wheel Bearing & Hub Assembly Pair
1999-2004GMC Sierra 2500 GMC Sierra 2500 Front Wheel Bearing & Hub Assembly Pair
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD Front Wheel Bearing & Hub Assembly Pair
2007GMC Sierra 2500 HD Classic GMC Sierra 2500 HD Classic Front Wheel Bearing & Hub Assembly Pair
2004-2006GMC Sierra 3500 GMC Sierra 3500 with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair
2000-2006GMC Yukon XL 2500 GMC Yukon XL 2500 Front Wheel Bearing & Hub Assembly Pair
2003-2007Hummer H2 Hummer H2 Front Wheel Bearing & Hub Assembly Pair

Part Interchange

Brand Label Part Number
DIY Solutions HUB01420
DIY Solutions HUB01204

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Timken
Brand #: TKSHS00304
Product Reviews
5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
2001 SILVERADO 2500 HD DURAMAX
JUST NOW GOT AROUND INSTALLING THE TWO WHEEL BEARING. TOOK US 2 HOURS. ALL WENT WELL. THE STRANGE NOISE COMING (SIMILAR NOISE WHEN APPLYING THE BREAKS ON SLIPPERY ROAD) HAS TOTALLY BEEN ELIMINATED--VERY ANNOYING. DEALER WANTED TO REPLACE ONLY THE LEFT WHEEL BEARING. BY BUYING THE TIMKEN BEARING FROM 1A AUTO I STILL SAVED $500. MY TRUCK (IN MICHIGAN) IS RUST FREE (WELL, ALMOST) HAS 260.000 MILES AND IT A VERY RELIABLE "WORK HORSE".
July 30, 2017
Good quality
Awsome parts really feel the difference on truck !!fit perfect on my Silverado 2500 HD
December 12, 2017
Jeff mullins
Very pleased and happy with all products Ive received , and also the speed of which the orders are shipped after the order is placed. Quality parts and quality service thank you for such an affordable company with quality and caring employees.
September 20, 2018
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Hummer Front Wheel Bearing & Hub Assembly Pair Timken TKSHS00304-TKSHS00304 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.