Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Install the new hub (1:11)
    • Apply the O ring to the new hub
    • Use a grease gun to apply grease to the lower ball joint, upper ball joint and tie rod end.
    • Feed the ABS wiring for the hub through the dust guard and mount the hub.
    • Thread in the three bolts and tighten them up evenly.
    • Torque these bolts to 65 ft lbs.
    • Clip the wiring harness up using the 10 and 13 mm bolts to secure the clips.
    • Connect the wiring harness.
  2. step : Assemble the brakes (4:10)
    • Put the rotor on the hub.
    • Mount the caliper bracket, pads and caliper.
    • Torque the bolts on the caliper to 50-60 ft lbs.
  3. step : Put the wheel back on (5:04)
    • Put the hub nut back on.
    • Put the wheel back on and thread the lug nuts.
    • Lower the vehicle.
    • Torque the hub nut to 90 ft lbs.
    • Use a star pattern to torque the lug nuts to 75 ft lbs.
    • Put the cap and lug nut covers back on.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket
  • 15mm Socket
  • 16mm Socket
  • 10mm Socket
  • 34mm Socket
  • 18mm Socket
  • 17mm Socket
  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:54 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket
  • 15mm Socket
  • 16mm Socket
  • 10mm Socket
  • 34mm Socket
  • 18mm Socket
  • 17mm Socket
  • 11mm Socket



This part replaces:

  • TRQ BHA84974

Vehicle Fit

  • 1997 Chevy Blazer S10 All Wheel Drive Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1998-2005 Chevy Blazer S10 4 Wheel Drive Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1998-2004 Chevy S10 Pickup 4 Wheel Drive Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1998-2000 GMC Envoy Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1997 GMC Jimmy S-15 All Wheel Drive Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1998-2001 GMC Jimmy S-15 4 Wheel Drive Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1998-2004 GMC S-15 Sonoma 4 Wheel Drive Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1998-2000 Isuzu Hombre Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
  • 1997-2001 Olds Bravada Front Wheel Bearing & Hub Assembly with (1) 36mm Axle Nut Socket
Part #: 1ASHS01176

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More