Replaces

Wheel Bearing & Hub Assembly Front TRQ BHA53901 - 1ASHF00017

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Ball Bearing
  • Front or Rear Location: Front

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 7470014
  • Direct replacement
  • Built to strict quality control standards
This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53901 Axle / Spindle Nut Torque Specification

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
wheel bearing
part arrived on a timely manner.i watched your videos on how to install and it went very well.i really like your install videos and would encourage you to do more.
July 28, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1984Buick Skyhawk Buick Skyhawk Front Wheel Bearing & Hub Assembly for Models with 12mm Attaching Bolts Driver or Passenger Side TRQ
1985-1989Buick Skyhawk Buick Skyhawk Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1986-1998Buick Skylark Buick Skylark Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1985-1987Buick Somerset Buick Somerset Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1984Cadillac Cimarron Cadillac Cimarron Front Wheel Bearing & Hub Assembly for Models with 12mm Attaching Bolts Driver or Passenger Side TRQ
1985-1988Cadillac Cimarron Cadillac Cimarron Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1987-1996Chevy Beretta Chevy Beretta Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1984Chevy Cavalier Chevy Cavalier Front Wheel Bearing & Hub Assembly for Models with 12mm Attaching Bolts Driver or Passenger Side TRQ
1985-2005Chevy Cavalier Chevy Cavalier Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1987-1996Chevy Corsica Chevy Corsica Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1992-1998Oldsmobile Achieva Olds Achieva Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1985-1987Oldsmobile Calais Olds Calais Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1984Oldsmobile Firenza Olds Firenza Front Wheel Bearing & Hub Assembly for Models with 12mm Attaching Bolts Driver or Passenger Side TRQ
1985-1988Oldsmobile Firenza Olds Firenza Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1984Pontiac 2000 Pontiac 2000 Front Wheel Bearing & Hub Assembly for Models with 12mm Attaching Bolts Driver or Passenger Side TRQ
1985-1998Pontiac Grand Am Pontiac Grand Am Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1985-1994Pontiac Sunbird Pontiac Sunbird Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
1995-2005Pontiac Sunfire Pontiac Sunfire Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ

This part replaces:

  • Hollander 538-00235
  • TRQ BHA53901
  • OE # 7470014
Part #: 1ASHF00017


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53901

How-to Video:

(09:45 min)