Replaces

Wheel Bearing & Hub Assembly Front Pair TRQ BHA53624 - 1ASHS00547

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Ball Bearing
  • Quantity: Pair
  • Front or Rear Location: Front

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 4779199AA
  • Fit 5 Lug Wheels
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards
  • Fit RWD (Rear Wheel Drive) Models only
    • Do NOT fit AWD (All Wheel Drive) Models

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54066 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:09)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:21)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:46)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (2:12)
    • Tap between the hub and dust cover with a hammer and chisel
    • Remove the dust cover
    • Remove the 35mm center nut
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (4:03)
    • Insert the wheel hub into the spindle
    • Install the 35mm nut
    • Torque the nut to 184 foot-pounds
    • Install the dust shield
  6. step : Preparing the New Brake Pads and Rotors (5:00)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  7. step : Installing the Brake Rotor (7:23)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  8. step : Installing the Brake Pads (8:49)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  9. step : Reattaching the Wheel (9:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Rubber Mallet
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Gloves
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • Complete Metric Socket Set

4.9 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
1
0
0
0
Happy customer...
I like the prices and selections available...the product seems to made of high quality parts so i am happy with the purchase...it was delivered on the expected date plus you can't beat the free shipping...will be recommending to friends!
August 29, 2018
Purchased
1 month ago
Great Product - Awesome Value!!
These hub assemplies were spot on! They came as a set and were 20% less in cost as a pair from what the big box stores charge for just one. They were obviously very high quality when I pulled them out to install and they arrived super fast. The installation videos helped as well. An all around great product, at a great price and great support made the purchase 100% worth while!
August 27, 2018
Purchased
1 month ago
HUB ASSEMBLY
I've had my hub assembly installed for 2 weeks now and I've got to say it solved my grinding noise. Did it by myself thanks to the turorial video. Thanks to 1A auto. Will do future purchases.
June 18, 2018
Purchased
3 months ago
great
Exactly the right part, cheap and fast. I RECOMEND!
May 7, 2018
Purchased
5 months ago
Excellent part quality, fast ahipping, very good pricing.
Parts fit perfectly and were a perfect match to the originals. Solved my wheel bearing noise problem of my 2006 Charger with 170000 miles. Highly recommend 1aauto. Even came with a torque sheet for installation which is great attention to detail and excellent customer service.
January 8, 2018
Purchased
9 months ago
Wheel hub assembly
I received both of them and they appear to be excellent quality parts. They are an exact fit for my 2008 Dodge Magnum SXT.
They were easy to install and the car drives very well.
August 29, 2017
Purchased
1 year ago
Good instructions
The video was very good with good views of the work being done on the vehicle. It also gives you a list of the tools required for the job.
July 19, 2017
Purchased
1 year ago
True as advertised & fast delivery
Parts were as advertised & price was affordable. Install video was awesome too, will definitely buy from 1aauto again!
February 6, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2011Chrysler 300 Chrysler 300 Front Wheel Bearing & Hub Assembly Pair Rear Wheel Drive TRQ
2012-2016Chrysler 300 Chrysler 300 SRT-8 Front Wheel Bearing & Hub Assembly Pair TRQ
2008-2011Dodge Challenger Dodge Challenger Front Wheel Bearing & Hub Assembly Pair TRQ
2012-2014Dodge Challenger Dodge Challenger SRT-8 Front Wheel Bearing & Hub Assembly Pair TRQ
2006-2011Dodge Charger Dodge Charger Front Wheel Bearing & Hub Assembly Pair Rear Wheel Drive TRQ
2012-2014Dodge Charger Dodge Charger SRT-8 Front Wheel Bearing & Hub Assembly Pair TRQ
2005-2008Dodge Magnum Dodge Magnum Front Wheel Bearing & Hub Assembly Pair Rear Wheel Drive TRQ

This part replaces:

  • TRQ BHA53624
Part #: 1ASHS00547


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53624

How-to Video:

(10:22 min)