Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake Hose (0:42)
    • Remove the hose clamps from the air intake hose with a flat blade screwdriver
    • Remove the T30 Torx screw from the air box
    • Pull the air intake hose up and out
  2. step : Removing the Serpentine Belt (1:12)
    • Familiarize yourself with the route of the serpentine belt
    • Insert a 15mm socket and ratchet into the tensioner
    • Turn the socket and pull the belt over the center pulley
    • Release the tensioner
    • Pull the belt off by hand
  3. step : Removing the Radiator Fan Clutch (1:48)
    • Loosen the four 13mm bolts on the radiator fan
    • Tighten the 13mm bolts by hand
    • Insert a fan clutch pulley wrench into the pulley
    • Place an adjustable wrench in and loosen the clutch
    • Hold the pulley and twist the fan to start remove the fan clutch from the shaft
    • Remove the four 13mm bolts
    • Shake the fan to loosen it from the clutch
    • Hold on to the fan clutch and twist the water pump to remove the fan
    • Pull the fan and clutch up
    • Disconnect on the radiator fan wiring harnesses
    • Pry out the clip in the radiator fan
    • Reach behind the radiator fan and remove the radiator fan and clutch
  4. step : Installing the New Radiator Fan Clutch (5:12)
    • Place the clutch in the fan with the harness on the driver side
    • Place the radiator fan down in smooth side in front
    • Lower the fan and clutch down into place
    • Push the clutch out of the fan
    • Reconnect the wiring harnesses
    • Push the clip into the radiator fan
    • Pull the clutch up and back through the fan onto the water pump pulley
    • Turn the pulley to twist it back into the clutch
    • Line up the fan on the clutch
    • Insert and tighten the four 13mm bolts
    • Twist the clutch on as far as possible
    • Insert the fan clutch pulley wrench into the pulley
    • Place an adjustable wrench in and tighten the clutch
  5. step : Installing the Serpentine Belt (7:50)
    • Loop the belt around the crank shaft pulley
    • Bring it around the water pump
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Bring it around the belt tensioner
    • Pull the tensioner clockwise with the 15mm socket and ratchet
    • Release the tensioner
    • Make sure the belt is on the correct pulleys
  6. step : Installing the Air Intake Hose (9:06)
    • Insert the air intake hose into place
    • Tighten the two hose clamps with a flat blade screwdriver
    • Insert and tighten the T30 Torx bolt

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Fan Clutch Wrench

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great product!
I watched the how-to video, gathered my tools and had the pump and clutch installed quickly with minimal cursing;). Great parts, identical visually to factory. Easy install.
July 10, 2018
1 month ago
Products arrived on time and work wonderfully.
Best price, easy to order, working product, arrived on time. Installation was difficult, I would get the tool for the job.
May 25, 2018
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2007 Buick Rainier Water Pump & Fan Clutch Kit L6 4.2L
  • 2002-2009 Chevy Trailblazer Water Pump & Fan Clutch Kit L6 4.2L
  • 2002-2006 Chevy Trailblazer EXT Water Pump & Fan Clutch Kit L6 4.2L
  • 2002-2009 GMC Envoy Water Pump & Fan Clutch Kit L6 4.2L
  • 2002-2006 GMC Envoy XL Water Pump & Fan Clutch Kit L6 4.2L
  • 2004-2005 GMC Envoy XUV Water Pump & Fan Clutch Kit L6 4.2L
  • 2003-2008 Isuzu Ascender Water Pump & Fan Clutch Kit L6 4.2L
  • 2002-2004 Olds Bravada Water Pump & Fan Clutch Kit L6 4.2L
  • 2005-2007 Saab 9-7X Water Pump & Fan Clutch Kit L6 4.2L

This part replaces:

  • A1 Cardone PWP9234
  • Airtex AW5097
  • Dorman 622-001
  • Hollander 326-00748
  • Hollander 324-00878
  • OE # 15293048
  • OE # 12620226, 24576956
Part #: 1AEEK00820

Order must be placed by 4pm ET

How-to Video:

(10:06 min)