Replaces
Replaces VW Passat Audi A4 Front Driver & Passenger Side 2 Piece CV Axle Assembly Set GKN GKNK00162
$405.95
Replaces 2004-05 VW Passat L4 2.0L Fuel Pump Module Assembly Delphi FG1406
$331.95
Replaces VW Passat Audi A6 A6 Quattro Front 13 Piece Suspension Kit DIY Solutions SUS01895
$314.95
Replaces VW Beetle Golf Jetta Passat Timing Belt Kit with Water Pump Gates TCKWP333M
$294.95
Replaces 2004-05 VW Passat L4 2.0L Diesel Turbocharger TRQ TCA15475
$289.95
Replaces VW Passat Audi A6 Quattro Fuel Pump Module Assembly Delphi FG0975
$287.95
Replaces VW Passat Audi A6 A6 Quattro Front 11 Piece Suspension Kit URO 4B3 498 500C
$279.95
Replaces VW Beetle Golf Jetta Passat EGR Valve Pierburg 7.00365.06.0
$260.95
Replaces VW Audi Electric Air Pump Pierburg 7.22738.08.0
$255.50
Replaces VW Passat Audi A6 Quattro 10 Piece Suspension Kit TRQ PSA59761
$249.95
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
On this, fender markers are pretty easy. You just grab hold of them and try to move it back and forth. You can see this one moves backwards. It might move backwards, it might move forwards, but if it moves backwards, push it backwards and then pry out.
Then this disconnects right here. You can access your bulb, they do need an orange bulb. The bulb just pulls out and pushes back in. If your original has been broken, 1A Auto, we make a nice replacement.
Plugs right in and make sure it's nice and secure. Always make sure on the new ones that this clip is pushed down in, and that's kind of out like that. Just put it right back in. Put that side in then the clip side right in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a repeater light on this 2004 Volkswagen Jetta, and we show you on the one on the passenger's side, but the driver's side is the same procedure. The items you'll need are a new repeater light from 1AAuto.com and a flat blade screwdriver.
Using a flat blade screwdriver we wrapped in electrical tape so it won't scratch the paint, we just pry up on the side of your repeater light, and then just pull your socket out. To replace the bulb, you just pull it out, and push your new one in.
On the left is the old repeater light. On the right is the new one from 1AAuto. You can see they're identical, and they'll fit exactly the same. Push the socket into your new repeater light. Then push the front end of the repeater light in first, and then the back end. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
